Home / Support / Knowledge Base / Digi Remote Manager Articles

Digi Remote Manager Knowledge Base Articles

How to sign up for a Digi Remote Manager account
To sign up for a Digi Remote Manager account, please follow the instructions below.​If you would like to sign up for a fully featured Digi Remote Manager account, please contact our sales team at:&...
https://www.digi.com/support/knowledge-base/how-to-sign-up-for-a-digi-remote-manager-account
Sep 27, 2024
How to enable Email notifications for firmware updates on Digi Remote Manager
When new firmwares are released and are available on Digi Remote Manager, this will be shown in the Unread Notifications and in the Devices sections: However, this is visible only if a user lo...
https://www.digi.com/support/knowledge-base/how-to-enable-email-notifications-for-firmware-upd
Sep 27, 2024
How to keep Digi devices firmware and settings on sync using Digi Remote Manager Templates
If you have a known working configuration and firmware version and you want to ensure your deployed device inventory stays in sync with that, you can use the Templates feature in Digi Rem...
https://www.digi.com/support/knowledge-base/keep-your-firmware-and-configurations-in-sync-acro
Sep 25, 2024
How to Receive E-Mail Notification of Digi Remote Manager Alert Activity
Introduction This article describes how to configure Digi Remote Manager to provide E-Mail notification of Alert activity from your devices on Digi Remote Manager.Note: This article assu...
https://www.digi.com/support/knowledge-base/how-to-receive-an-e-mail-notification-when-a-devic
Sep 24, 2024
What are Digi Remote Manager System Alerts?
System alarms define conditions that happen during processing in Digi Remote Manager that a customer may want to be notified about. These alerts are automatically created by Digi Remote Manage...
https://www.digi.com/support/knowledge-base/what-are-system-alarms
Sep 23, 2024
What are Digi Remote Manager System Alerts?
Digi Remote Manager System Alerts are notifications that automatically trigger for specific processing conditions within the Remote Manager that a customer may want to be notified about. These aler...
https://www.digi.com/support/knowledge-base/what-are-digi-remote-manager-system-alerts
Sep 06, 2024
HOW TO: Query the Connection History of a Connected device from Digi Remote Manager
Introduction:One very useful aspect of Device Management on the Digi Device Remote Manager is the ability to view the Connection History of a device.  This of course refers to the connection h...
https://www.digi.com/support/knowledge-base/how-to-query-the-connection-history-of-a-connected
Aug 12, 2024
Device Cannot be Registered on Digi Remote Manager
If you attempted to install your Digi device into Digi Remote Manager, and recevied an error message that the device cannot be registered into your account, as shown in the image below:please take ...
https://www.digi.com/support/knowledge-base/device-cannot-be-registered-on-digi-remote-manager
Jul 26, 2024
How to obtain a List of Digi Remote Manager Connected or Disconnected Devices
The following examples may be used in a web browser in order to obtain a list of devices which are currently in a connected state on your Digi Remote Manager account.List of Connected devices:https...
https://www.digi.com/support/knowledge-base/how-to-obtain-a-list-of-device-cloud-connected-or
Jul 23, 2024
device/group of devices Digi Remote Manager access to users via Subaccounts
This article explains how to create a subaccount to grant a user the access to a specific device/group of devices.This is usually needed for Distributors/Resellers who manage their customers Subacc...
https://www.digi.com/support/knowledge-base/device-group-of-devices-drm-access-to-users-via-su
Jul 18, 2024
DRM APIs authentication
No, the Remote Manager APIs use HTTP Basic Authentication. The username and password are the same as the username and password you use to sign-on to the Remote Manager UI.As an example, when the AP...
https://www.digi.com/support/knowledge-base/drm-apis-authentication
Jul 17, 2024
How to get the Support Report file from a DAL device
When opening a case to Digi Tech Support related to a device running DAL OS (Note1), it is particularly useful to include a Support Report file.Generating a Support Report will take the complete co...
https://www.digi.com/support/knowledge-base/how-to-get-the-support-report-file-from-a-dal-devi
Jun 19, 2024
Atsign sshnoports on a Digi DAL OS device
What are Digi Containers?Digi Containers Service is an add-on service that simplifies and centralizes the process of building, deploying and running custom applications on devices managed with Digi...
https://www.digi.com/support/knowledge-base/atsign-sshnoports-on-a-digi-dal-os-device
May 13, 2024
Ignition Edge on Digi DAL OS devices
The following is information about deploying, running, and monitoring an Ignition Edge application running inside a Digi Containers service available on a Digi router through Digi Remote ...
https://www.digi.com/support/knowledge-base/ignition-edge-on-digi-dal-os-devices
Feb 26, 2024
How to update cached state or settings data for a device on Digi Remote Manager
The following information is most useful for a device which is infrequently connected.  For a device currently in Connected status on Digi Remote Manager,  selecting the Re...
https://www.digi.com/support/knowledge-base/how-to-update-cached-state-or-settings-data-for-a
Feb 23, 2024
Digi Remote Manager Information Assistant Bot
Digi Remote Manager AI Information Assistant 
https://www.digi.com/support/knowledge-base/digi-remote-manager-information-assistant-bot
Feb 15, 2024
Can a DAL-based device in IP Passthrough mode connect to Digi Remote Manager?
Yes, enabling IP Passthrough mode on a DAL-based device (a Digi device that runs the DAL Operating System) should not inherently interfere with connectivity to Digi Remote Manager.Related links:Mee...
https://www.digi.com/support/knowledge-base/can-a-dal-based-device-in-ip-passthrough-mode-conn
Dec 27, 2023
How to find firmware for your product
The firmware for your Digi product can be found on the Digi website. The steps required to find and download your firmware are defined below.Navigate to the support site on digi.com.Filter and sele...
https://www.digi.com/support/knowledge-base/how-to-find-firmware-for-your-product
Dec 12, 2023
Using Digi Cellular Gateways as Backhaul for Digi Wireless Networks
 This application note discusses the benefits of combining Digi cellular gateways/routers with Digi wireless networking products to create integrated, low cost end-to-end wireless data connect...
https://www.digi.com/support/knowledge-base/using-digi-cellular-gateways-as-backhaul-for-digi
Oct 31, 2023
What are the devices limits on Remote Manager Accounts
When a specified quantity of DRM licenses is purchased (available licenses), this is reflected in the Device Limit and can be checked in DRM  at System > Accounts clicking on the ...
https://www.digi.com/support/knowledge-base/drm_devicelimit_main_sub_account
Aug 07, 2023
Digi Remote Manager data usage for DAL-based products
This KB article is intended to give users an understanding of how much data the Digi Remote Manager (Digi RM) connecton/client typically uses, for Digi products that run the modern DAL Operating Sy...
https://www.digi.com/support/knowledge-base/digi-remote-manager-data-usage-for-dal-based-produ
Jun 15, 2023
Read Only and Custom User Roles on DRM
Why a Digi Remote Manager (Digi RM) Read-Only user can see all actions as allowed? What is the difference with Custom Users? This Article provide clarification and examples on this aspect of D...
https://www.digi.com/support/knowledge-base/read-only-and-custom-user-roles-on-drm
Jun 15, 2023
How to update firmware on an XBee Cellular module via Digi Remote Manager
These directions assume that you have the XBee module already added to your Digi Remote Manager account and that the module is configuured to be connected to Digi Remote manager via its AT commands...
https://www.digi.com/support/knowledge-base/how-to-update-firmware-on-an-xbee-cellular-module
Mar 28, 2023
Digi Containers SDK
The following is information about creating, deploying, running, and monitoring a container for the Digi Containers service in Digi Remote ManagerDisclaimer:  Digi provides a compute...
https://www.digi.com/support/knowledge-base/digi-containers-sdk
Jan 03, 2023
How to enable redundancy with IP network failure on an AnywhereUSB
In this article, we will describe How to enable redundancy with IP network failure on an AnywhereUSB 24 Plus device. The Digi AnywhereUSB/14 family had a feature called  "IP Network ...
https://www.digi.com/support/knowledge-base/how-to-enable-redundancy-with-ip-network-failure-o
Dec 20, 2022
Digi Remote Manager: Data Usage for DAL Products
SummaryAverage monthly data usage: 4.68MB on cellular connections18.1 MB on non-cellular connections (wired Ethernet, Wi-Fi client, PPPoE, etc)no configuration/firmware updatesDigiRM-related config...
https://www.digi.com/support/knowledge-base/data-usage-for-dal-products
Dec 07, 2022
Python on EX-series Digi Devices
Starting in firmware version 21.11.60.63, python is not included in the base firmware for EX-series devices.  This includes the following device types: Digi EX12Digi EX12-PRDigi EX15Digi EX15...
https://www.digi.com/support/knowledge-base/python-on-ex-series-digi-devices
Jun 15, 2022
AVIEW to Digi Remote Manager (Digi RM) Migration
Digi has announced the End of Life of our legacy AVIEW platform.  Our current offering is our Digi Remote Manager (Digi RM) platform.  Any devices using AVIEW must be moved over to Digi R...
https://www.digi.com/support/knowledge-base/aview-to-digi-remote-manager-(digi-rm)-migration
May 10, 2022
3G sunset Digi firmware required updates
For reference, this article relates to the main article titled 3G Network Sunset in 2022 impact on 4G devices.  This article provides the device types and part numbers of Digi devices tha...
https://www.digi.com/support/knowledge-base/3g-sunset-digi-firmware-required-updates
Mar 30, 2022
How to reset/erase the Digi Remote Manager certificate on devices running DAL firmware 22.2 or newer
This article will describe the specific situations related to the new certificate usage, in which a device running DAL firmware 22.2.9.85 or newer might not be able to connect to Digi Remote Manage...
https://www.digi.com/support/knowledge-base/how-to-reset-erase-the-digi-remote-manager-certifi
Mar 17, 2022
Script to Correct 3G Sunset Issues with Telit Modems
For reference, this article relates to the main article titled 3G Network Sunset in 2022 impact on 4G devices.  This article provides an additional script that needs to be run on Digi IX14 and...
https://www.digi.com/support/knowledge-base/script-to-correct-3g-sunset-issues-with-telit-mode
Mar 11, 2022
How To: Update Digi Remote Manager "Last Update" Time Daily via Automation
Digi Remote Manager® is a platform which is home to many devices and the data which they provide, both about themselves, as well as data about other devices and processes which they know about....
https://www.digi.com/support/knowledge-base/how-to-update-digi-remote-manager-last-update-time
Mar 04, 2022
Firewall concerns for outbound EDP connections to Digi Remote Manager
Prerequisites:This article assumes you've reviewed the available Configuration/Troubleshooting guidance for your particular Digi product, and have ensured your Gateway or device is otherwise co...
https://www.digi.com/support/knowledge-base/firewall-concerns-for-outbound-edp-connections-to
Feb 21, 2022
Experimenting with Remote Manager monitors (i.e. web hooks)
IntroductionMonitor IntroductionPush MonitorsQuery MonitorsEvent typesAlerting IntroductionAlert UI - Classic Receive Monitor EventsSetup an AlertSetting up the MonitorReceiverCreate the monitorWat...
https://www.digi.com/support/knowledge-base/how-to-experimenting-with-remote-manager-monitors
Jan 26, 2022
Streams Queries - /ws/v1/streams/inventory
This article covers the query support available within the Digi RM3 /ws/v1/streams API. Query support is something which exists in many of the v1 APIs within Digi RM3, but until now it was mi...
https://www.digi.com/support/knowledge-base/stream-queries-in-digi-remote-manager-ui-3-x
Oct 26, 2021
Whats New In Digi Remote Manager - Digi RM3 Information and Videos
Overview:Digi Remote Manager® is evolving, with new features and improvements for management of Digi devices in the IoT space being released continually.  This article highlights various f...
https://www.digi.com/support/knowledge-base/whats-new-in-digi-remote-manager-3
Oct 06, 2021
How do I delete the Digi Remote Manager server cookie downloaded in my browser?
Overview: We hope to continuously improve the customer experience for Subscriber/Users of Digi Remote Manager (aka Digi RM, Digi RM3, Digi Device Cloud).  We do this in part by adding exciting...
https://www.digi.com/support/knowledge-base/how-do-i-delete-the-device-cloud-or-remote-manager
Aug 08, 2021
Advanced API Queries in Digi Remote Manager UI 3.x
You may not know that you can take advantage of a complex query language in the search box of the new Digi Remote Manager 3.x. Underlying the simple search box is an advanced yet simple query ...
https://www.digi.com/support/knowledge-base/advanced-api-queries-in-digi-remote-manager-ui-3-x
Jul 21, 2021
3G Network Sunset in 2022 impact on 4G devices
Carriers have announced that they will be shutting down their 3G network in 2022.  The sunset of the 3G networks may impact some 4G LTE devices.  This situation could cause certain 4G LTE...
https://www.digi.com/support/knowledge-base/at-t-3g-network-sunset-february-2022
Mar 15, 2021
DRM API Configurations and Health Excel table
With Digi Remote Manager® 3.0 (Digi RM), the API can be used to obtain, for example in Excel, an automatically updating table containing data as Configurations and Health Configurations. This ...
https://www.digi.com/support/knowledge-base/drm-api-configurations-and-health-excel-table
Sep 08, 2020
Accessing Digi's FTP Site
IntroductionDigi FTP site allows customers to download files such as firmware, documentation, tools etc. This is particulary useful for downloading older firmware versions which are not linked dire...
https://www.digi.com/support/knowledge-base/accessing-digi-ftp-site
Sep 07, 2020
What are Digi Remote Manager Throttles?
What are Throttles? Throttles, in Digi Remote Manager®, are defined as either system wide or rate plan throttles.   Throttles generally protect Digi Remote Manager from “rogue&rdq...
https://www.digi.com/support/knowledge-base/what-are-throttles
Aug 26, 2020
How to Export XML Settings from a Device on Digi Remote Manager 3.0 using API
With Digi Remote Manager® 3.0 (Digi RM), in order to obtain an XML file with all (the settings of a device), the API Explorer method can be used following the steps below (the result will ...
https://www.digi.com/support/knowledge-base/how-to-export-xml-settings-from-a-device-on-drm3-u
Aug 21, 2020
"Could not find setting descriptor" error when creating configuration on Digi Remote Manager 3
Since firmware version 8.x TransPort routers had their "device type" name changed and the word "TransPort" removed from it. For example, a TransPort WR44 would show up as "...
https://www.digi.com/support/knowledge-base/could-not-find-setting-descriptor-error-when-creat
Jun 16, 2020
Digi Remote Manager Enabled by Default on DAL Devices
Why move all devices to Digi Remote Manager by default? As part of unifying all Digi devices to a common central management portal, the commercial aView portal will be phased in late 2021.&nb...
https://www.digi.com/support/knowledge-base/digi-remote-manager-by-default
May 06, 2020
Correcting Error/Warning Health Status in Digi Remote Manager 3.0
Within Digi Remote Manager® 3.0, when a device health status is in ERROR or WARNING state, users can check what caused the condition and then decide how to proceed accordingly. 1)  From t...
https://www.digi.com/support/knowledge-base/what-to-do-when-a-device-is-showing-error-warning
Jan 31, 2020
How to Reset the Health Metric Status in Remote Manager
Resetting the status of Health Metrics on Digi Remote Manager can be useful in some scenarios,  for example when the state is stuck to a state that is not properly reflecting the current statu...
https://www.digi.com/support/knowledge-base/health-metric-status-reset
Jan 10, 2020
Methods for Configuring DAL Devices
BackgroundDigi® products that run DAL firmware offer multiple methods for configuring the device, both remotely and locally onsite. This article outlines these various methods, which are:Digi R...
https://www.digi.com/support/knowledge-base/ways-to-configure-dal-devices
Dec 04, 2019
Digi 3rd Party Chinese Radios
Question: Has Digi in the past, or currently, used any components purchased from the following companies? •    Huawei •    ZTE Corp •   &n...
https://www.digi.com/support/knowledge-base/3rd-party-components-used
Oct 21, 2019
Unique Default Passwords for Digi Products (SB-327)
BackgroundAs of January 1, 2020, the California Consumer Privacy Act SB-327 requires all cellular and internet connected devices manufactured after that date to have unique default passwo...
https://www.digi.com/support/knowledge-base/unique-default-passwords-for-digi-products
Oct 16, 2019
Verizon Upgrade for Telit Modems
Verizon notified cellular product manufacturers of a software defect present in Intel chipsets utilized by several cellular modem vendors. Digi uses some of these third party cellular modems in som...
https://www.digi.com/support/knowledge-base/verizon-upgrade
Oct 09, 2019
Unique Default Password Product Information
Below is the list of Digi products that require a unique password to log in to the device as well as to register the device on Digi Remote Manager. List of products where a unique password is requ...
https://www.digi.com/support/knowledge-base/digi-remote-manager-and-unique-password-products-c
Jul 22, 2019
SACK Vulnerability Patch Status
SACK Vulnerability Patch Status for affected Digi products  Product Family/ProductVersion fix is included inEstimated Release DateCellularDigi IX1419.8Aug, 2019Digi EX1519.8Aug, 2019Digi LR54...
https://www.digi.com/support/knowledge-base/sack-vulnerability-patch-status
Jul 16, 2019
XBee Cellular with Digi Remote Manager firmware upgrades
How do you perform a firmware upgrade via an RCI request on an XBee Cellular module? First, it should be noted that not all firmware updates will be possible or recommended via the Digi Remote...
https://www.digi.com/support/knowledge-base/remote-manager-xbee-cell-firwmare-upgrade-api
Jan 24, 2018
What is the difference between: Store device data (data roll-ups) Store Device data (raw data rete
Store Device Data *per account (data roll-ups) Remote Manager will retain roll-ups for each DataStream within set limits depending on your edition. The amount specified in the Edition Summary...
https://www.digi.com/support/knowledge-base/what-is-the-difference-between-store-device-data-d
Jul 06, 2017
Remote Manager RCI Example for Changing Settings on Remote Manager Connected Devices
 Remote Manager RCI calls can be issued from the Web Services Console under your Remote Manager account to make setting changes on multiple units connected to Remote Manager for...
https://www.digi.com/support/knowledge-base/device-cloud-rci-example-for-changing-settings-on
Jul 06, 2017
How to find out the date code and manufacturing location information of Digi Products.
Depending on the location the units are built effects the orientation, linked below is the date code from USA or Thailand. The date code is 4 digits, 2 digit year and 2 digit week (YYWW) so in thes...
https://www.digi.com/support/knowledge-base/how-to-find-out-the-date-code-and-manufacturing-lo
Jul 06, 2017
SCI request error - "Name not registered" in Device Cloud
When you are using Python callback SCI request, you may receive an error like "Name not registered" in the response as shown below        <do_command target="r...
https://www.digi.com/support/knowledge-base/sci-request-error-name-not-registered-in-device-cl
Jul 06, 2017
Digi Remote Manager: Adding/Deleting a user to/from your account
Adding or Deleting a user to your accountTo add a user, log into the server, click on the settings icon on the top of the screen, then select Account Settings > Users. Click the “Add ...
https://www.digi.com/support/knowledge-base/device-cloud-adding-deleting-a-user-to-from-your-a
Jul 06, 2017
HOW TO: Paginate a Data Stream to receive more than 1000 Data Points
IntroductionRemote Manager has proven to be a very useful tool for those who learn to use it to their advantage.  This article will cover the subject of Data Streams, and how to receive more t...
https://www.digi.com/support/knowledge-base/how-to-paginate-a-data-stream-to-receive-more-than
Jul 06, 2017
DTE vs. DCE
Digi makes many serial devices, some of which are DTE (PortServer TS, EtherLite, Connect/ConnectPort, Digi One, USB-to-serial), and others which are DCE (TransPort, PKG RF modems, XBIB interface bo...
https://www.digi.com/support/knowledge-base/dte-vs-dce
Jul 06, 2017
What does "Galvanically isolated from Earth ground" mean?
"Galvanically isolated" is a term used to describe the relation between two different points in a circuit. It means that the ASYNC Signal Ground (SG) is isolated from earth ground, ...
https://www.digi.com/support/knowledge-base/what-does-galvanically-isolated-from-earth-ground
Jul 06, 2017
HOW TO: Example for Configuring a Device Cloud Task to Set a Gateway XBee PAN ID
To configure a task that will change the PAN ID on a gateway XBee radio, you will want to go to the Schedules option in your Device Cloud account under Device Manger.  Click on&...
https://www.digi.com/support/knowledge-base/how-to-configure-a-device-cloud-task-for-configuri
Jul 06, 2017
What security policy is used by the Device Cloud?
 Digi Remote Manager security policy is based upon a control matrix developed to support the standards set forth by the National Institute of Standards and Technology (NIST), ISO/IEC 27002, No...
https://www.digi.com/support/knowledge-base/what-security-policy-is-used-by-the-device-cloud
Jul 06, 2017
General Certification Comments on Digi products
Check the main reference manual for the given Digi product.  Generally they have a section marked 'Certification'.  If the certification in question is not seen there it is most l...
https://www.digi.com/support/knowledge-base/general-certification-comments-on-digi-products
Jul 06, 2017
Error is seen adding a device to Digi Remote Manager: "Failed to add one or more de
Problem:  If you're trying to add a device to a Remote Manager server and it comes back with the message “Failed to add one or more devices:” (see below), it may mean that your...
https://www.digi.com/support/knowledge-base/error-is-seen-adding-a-device-to-digi-device-cloud
Jul 06, 2017
HOW TO: Configure Scheduled (cron) Reporting on the ConnectPort X2e for Smart Energy
Introduction:Pseudo reporting is where a Gateway is configured to poll a Smart Energy device in order to simulate ZCL reporting.  If the attribute value had exceeded a reportable_change a...
https://www.digi.com/support/knowledge-base/how-to-configure-scheduled-cron-reporting-on-the-c
Jul 06, 2017
Digi International Security Notice SSLv3 Vulnerability "POODLE"
Digi International Security NoticeCVE-2014-3566October 28th, 2014OverviewA security vulnerability  nicknamed "POODLE" CVE-2014-3566, was announced on October 14th, 2014. We have had ...
https://www.digi.com/support/knowledge-base/digi-international-security-notice-sslv3-vulnerabi
Jul 06, 2017
List of Remote Manager Disconnect Definitions
 
https://www.digi.com/support/knowledge-base/list-of-device-cloud-disconnect-definitions
Jul 06, 2017
Reset Xbee Network Layer
Process to reset an Xbee Network Layer:  To reset the Xbee Network Layer we will need two things,Gateway Device ID: Found in Remote Manager -> Device Management -> Device...
https://www.digi.com/support/knowledge-base/reset-xbee-network-layer
Jul 06, 2017
Recommendations for lowering cellular data usage/overage for Device Cloud connectivity
SMS: Wake up (shoulder tap): A wake up or "shoulder tap" can be sent to trigger a connection to the Remote Manager.  This is documented at:Digi Remote Manager User Guide  ...
https://www.digi.com/support/knowledge-base/recommendations-for-lowering-cellular-data-usage-o
Jul 06, 2017
Digi International Security Notice Vulnerability "GHOST"
 Digi International Security NoticeOriginally issued March 6th, 2015, updated December 18, 2015  CVE-2015-0235OverviewA critical security vulnerability, reported as CVE-2015-0235, nickna...
https://www.digi.com/support/knowledge-base/digi-international-security-notice-vulnerability-g
Jul 06, 2017
HOW TO: Find Country of Origin (CoO) for Digi-manufactured products
It is Digi's goal to facilitate and expedite worldwide trade in the most effective and efficient manner, by proactively observing all international rules and regulations regarding export. To a...
https://www.digi.com/support/knowledge-base/how-to-find-country-of-origin-coo-for-digi-manufac
Jul 06, 2017
How to create/edit/remove Groups in Remote Manager
The groups feature allows you to add or create a group and assign a list of devices to that group. You can create a hierarchical structure of device groups to help organize your device inventory. ...
https://www.digi.com/support/knowledge-base/how-to-create-edit-remove-groups-in-remote-manager
Jul 06, 2017
How to add/edit/delete a tag for a device in Remote Manager
Remote Manager uses tags to categorize devices.  You may want to edit the tags associated with a device if the purpose of a device changes or if you use tags to create a new sub-category of de...
https://www.digi.com/support/knowledge-base/how-to-add-edit-delete-a-tag-for-a-device-in-remot
Jul 06, 2017
HOW TO: Change the Digi Remote Manager Name on Gateways Using Device Manager
To change the server name for the Device Cloud connection from your Device Cloud account, you will open Classic UI by selecting settings and selecting Open Classic. Then,  navigate to the...
https://www.digi.com/support/knowledge-base/how-to-change-the-device-cloud-name-on-gateways-us
Jul 06, 2017
Device Cloud Query Monitor Details and Examples
Quick Introduction to MonitorsDuring both normal (uploading data from devices) and abnormal (alarms triggered for device health) operation of a customer's DC environment, the platform generates eve...
https://www.digi.com/support/knowledge-base/query-monitor-information-and-examples
Jul 06, 2017
HOW TO: Add a Digi Remote Manager DataStream Containing a Location
Adding a Digi Remote Manager DataStream Containing the Location Coordinates  The following examples show how to add a Digi Remote Manager DataStream with the location where the data valu...
https://www.digi.com/support/knowledge-base/how-to-add-a-device-cloud-datastream-for-a-locatio
Jul 06, 2017
Error codes seen with data push from device to Device Cloud? idigid protocol error code list
Introduction:Digi RF Gateways and devices which use the edp protocol to "push" data to Remote Manager can sometimes encounter errors pushing that data, if Remote Manager isn't availab...
https://www.digi.com/support/knowledge-base/error-codes-seen-with-data-push-from-device-to-dev
Jul 06, 2017
Unable to login to the Remote Manager
 Due to regular scheduled maintanence or unplanned outages, Remote Manager may not be accessible.  The following URL will show the current status of each Remote Manager server, along with...
https://www.digi.com/support/knowledge-base/unable-to-login-to-the-device-cloud
Jul 06, 2017
HOW TO: Send an AT command to an XBee from a CP-X2 or CP-X4 commandline via Telnet/SSH or Device Cl
Introduction: This article discusses how to send an AT command from the CommandLine Interface (CLI) of a ConnectPort X2 or X4 Gateway, from either Telnet/SSH or via Remote Manager (assuming the Ga...
https://www.digi.com/support/knowledge-base/how-to-send-an-at-command-to-an-xbee-from-a-cp-x2
Jul 06, 2017
HOW TO: Configure ZCL (real) Reporting on the ConnectPort X2e for Smart Energy
Introduction: The ZCL or "real" reporting method is where a Smart Energy device (example: Programmable Communicating Thermostat or PCT) is configured to report attribute information about itself t...
https://www.digi.com/support/knowledge-base/how-to-configure-zcl-real-reporting-on-the-connect
Jul 06, 2017
HOW TO: Change the Remote Manager server configuration of a connected XBee Gateway
HOW TO: Change the Remote Manager server configuration of a connected XBee Gateway (formerly ConnectPort X2e ZB) or ConnectPort X2e SE Gateway: The easiest way to change the Remote Manager Se...
https://www.digi.com/support/knowledge-base/how-to-change-the-device-cloud-server-configuratio
Jul 06, 2017
Can the device type field be configured using the Device Cloud API?
 The Device Type (dpDeviceType) field cannot be changed (along with the dvVendorId field) from Remote Manager as it is a manufacturing assigned value which can only be displayed. With th...
https://www.digi.com/support/knowledge-base/can-the-device-type-field-be-configured-using-the
Jul 06, 2017
HOW TO: Pointing the Connectport TS to the Digi Remote Manager
Navigate to the web interface of the unit by entering the IP address of the unit in your web browser.  Navigate to the Digi Remote Manager menu in the Configuration section: Select "Appl...
https://www.digi.com/support/knowledge-base/how-to-pointing-the-connectport-ts-to-the-digi-dev
Jul 06, 2017
Digi Python Learning Recommendations
python.org - for training materials from the creators of the language.Digi Python Wiki - specializing in python and how it applies to Digi products: http://www.digi.com/wiki/developer/index.php/Sp...
https://www.digi.com/support/knowledge-base/digi-python-learning-recommendations
Jul 06, 2017
HOW TO: Obtain a Listing of Devices with Failed Scheduled Tasks
HOW TO:  Obtain a Listing of Devices with Failed Scheduled TasksFirst, obtain the applicable Task ID number with the following URL:  https://remotemanager.digi.com/ws/Task Next, en...
https://www.digi.com/support/knowledge-base/how-to-obtain-a-listing-of-devices-with-failed-sch
Jul 06, 2017
HOW TO: Digi Remote Manager: Add Data To A Data Stream
If you are using Digi RM3, please go to the settings in the top right of the page and select Open Classic. In this example, we will add data to a Data Stream associated with a device ID. We wi...
https://www.digi.com/support/knowledge-base/how-to-device-cloud-add-data-to-a-data-stream
Jul 06, 2017
HOW TO: Digi Remote Manager: Query Settings From a Device Using /ws/sci
First: the way to interact with the device’s settings and state information is through RCI (Remote Command Interface). That is a device-level interface that is accessible via the Remote Manag...
https://www.digi.com/support/knowledge-base/how-to-device-cloud-query-settings-from-a-device-u
Jul 06, 2017
convert IEC_104 protocol to IEC_101
On possible solution using Python can be seen here: https://github.com/vlet/iec104 Otherwise we would suggest to use Google for further research.
https://www.digi.com/support/knowledge-base/convert-iec-104-protocol-to-iec-101
Jul 06, 2017
Add a Digi Router to your Remote Manager account
This article explains how to add your Digi device to a DRM account. This article assumes that you have already set up your device to connect to the DRM and that you have a DRM account.  Logi...
https://www.digi.com/support/knowledge-base/adding-a-digi-device-to-the-digi-device-cloud-plat
Jul 06, 2017
Create DRM Automation python file router
The following example shows how to us a DRM Automation to upload a python script to a DAL router and set it to automatically run. Login to your DRM  account, go to the Automations Tab and cli...
https://www.digi.com/support/knowledge-base/how-to-create-a-device-cloud-task
Jul 06, 2017
Access historical data of the same type from multiple devices on Digi Remote Manager
If you have thousands of devices uploading time-series data like cellular health statistics and want an easy way to extract those data, try the Query Monitor API from Digi Remote Manager. Using RS...
https://www.digi.com/support/knowledge-base/access-historical-data-of-the-same-type-from-multi
Jul 06, 2017
Does Digi offer a Desktop version of Remote Manager?
No, initially, Remote Manager was offered as a Windows "desktop" application.  Currently, Remote Manager is exclusively web-based.More information about Digi Remote Manager:http://www.digi.com...
https://www.digi.com/support/knowledge-base/does-digi-offer-a-desktop-version-of-remote-manage
Jul 06, 2017
Description of chronyd Operation and NTP sample frequency within XBee Gateway and ConnectPort X2e SE
Options from Remote Manager Device UI (DCUI)The Gateway’s DCUI --- Advanced Configuration --- Time Server --- NTP Time Precision setting contains two options:  Standard = minpoll, m...
https://www.digi.com/support/knowledge-base/description-of-chronyd-operation-and-ntp-sample-fr
Jul 06, 2017
Sending Serial Data via Remote Manager, X2e and an Xbee
Periodically, one wants to send data from the Remote Manager to an XBee module connected to a device via the XBee modules Serial port or COM port. This can be done using the default application t...
https://www.digi.com/support/knowledge-base/serial-data-via-device-cloud-x2e-and-an-xbee
Jul 06, 2017
Using Digi's Applicaiton's Cluster ID's and End points on a Digi XBee
Digi Profile   Provides an overview of the ZigBee endpoint and cluster ID functionality supported in the Digi drop-in-networking profile.    Digi XBee Profile Overview The Digi...
https://www.digi.com/support/knowledge-base/using-digi-s-applicaiton-s-cluster-id-s-and-end-po
Jul 06, 2017