The following table lists the U-Boot file associated with each ConnectCore MP13 variant:
RAM size | TF-A file | fip file | U-Boot defconfig |
---|---|---|---|
256MiB |
Check your variant RAM size on the serial console boot log:
NOTICE: CPU: STM32MP135F Rev.Z
NOTICE: Model: Digi International ConnectCore MP13 Development Kit
NOTICE: BL2: v2.6-stm32mp1-r2.1(release):dub-2021.10-r4.2(8fdd4435)
NOTICE: BL2: Built : 14:43:31, Sep 14 2023
NOTICE: BL2: Booting BL32
optee optee: OP-TEE: revision 3.16 (43350dda)
U-Boot dub-2021.10-r4.2 (Sep 14 2023 - 14:42:17 +0000)
CPU: STM32MP135F Rev.Z
DRAM: 256 MiB
optee optee: OP-TEE: revision 3.16 (43350dda)
Clocks:
- MPU : 650 MHz
- AXI : 266.500 MHz
- PER : 24 MHz
- DDR : 533 MHz
WDT: Started with servicing (32s timeout)
NAND: 256 MiB
MMC: STM32 SD/MMC: 1
In: serial
Out: serial
Err: serial
Model: Digi International ConnectCore MP13 Development Kit
ConnectCore MP13 SOM variant 0x01: 256 MiB DDR3, Wi-Fi, Bluetooth
Board version 2
Boot: NAND
Net: eth0: eth1@5800a000Get shared mii bus on eth2@5800e000
, eth1: eth2@5800e000
Normal Boot
Hit any key to stop autoboot: 0
=>