Of the eight external tamper pins available on the STM32MP13, only the following lines are available on the ConnectCore MP13, multiplexed with other functionality:
GPIO | Tamper pin | Notes |
---|---|---|
GPIOA_IO06 |
TAMP_IN2 |
Used on the ConnectCore MP13 Development Kit for USB_PWR |
GPIOB_IO02 |
TAMP_IN7 |
unused |
GPIOF_IO10 |
TAMP_IN1 |
unused |
GPIOI_IO01 |
TAMP_IN2 / TAMP_OUT3 |
Used on the ConnectCore MP13 Development Kit for LPO_32K on SOM variants with Wi-Fi |
GPIOI_IO03 |
TAMP_IN4 / TAMP_OUT5 |
Used on the ConnectCore MP13 Development Kit for ETH1_RX_ER |
To use a pad as tamper pin, you must disable drivers with multiplexed functionality on the default device tree. |