You can create a bootable microSD card and use it to boot the ConnectCore MP13.
Create a bootable microSD card
Requirements
-
Root/administrator permissions in your development computer
-
A microSD card with a minimum capacity of 1 GB
Build images suitable for microSD card
Refer to Create bootable sdcard image for information on creating an image for the microSD card.
As a result of this process, you’ll create an artifact in the form ccmp1-<ram_size>.wks-<timestamp>-mmcblk.direct
.
Program the microSD card
This process formats and erases all contents on the microSD card. |
-
Insert the microSD card on your development PC and note the device node assigned to it.
-
Run the following command to write the full image to the microSD card:
$ sudo dd if=ccmp1-<ram_size>.wks-<timestamp>-mmcblk.direct of=<microsd_dev> $ sync
The microSD card is now ready.
Boot the target from microSD card
-
Insert the microSD card on the socket of the ConnectCore MP13 Development Kit
-
Change the boot mode switches to boot from the microSD:
-
BOOT.1
: OFF -
BOOT.2
: ON -
BOOT.3
: ON -
BOOT.4
: n/a
-
-
Apply power
The target boots from the microSD.