This is a list of known issues and limitations for Digi Embedded Yocto 4.0-r7:

  • Firmware update

    • The software update package must be located in the root level of the update media (subfolders are not yet supported).

    • To update from dey-3.2 version or lower to dey-4.0-r7 on a single boot layout, you must flash the recovery partition with the latest Yocto release before performing the firmware update.

  • ConnectCore Cloud Services

    • Remote file system management only supports names and paths up to 255 characters.

ConnectCore MP13 SOM

  • Wireless

    • Performance of the wireless interface is reduced when using concurrent mode, as the wireless interface is shared between several different functionalities.

    • When using wireless concurrent mode, Digi recommends you keep the different modes on the same frequency channels. For example, when configuring access point mode on channel 36 in the 5GHz band, connect to the same channel both in station mode and Wi-Fi direct so that the radio performance is optimized.

    • When working as an access point, DFS-capable channels in the 5GHz band are not supported.

    • Fast roaming (802.11r) network connections fail due to an issue in the Murata LBEE5PK2AE-564 firmware. It is expected that the Wi-Fi chip vendor fixes the issue for the next DEY release.