To start working with the ConnectCore MP13 module and Digi Embedded Yocto, you need the following items:
-
A ConnectCore MP13 kit
Verify that your ConnectCore MP13 Development Kit contains the following components:
Qty. Part Image 1
ConnectCore MP13 Development Kit
1
5V/3A power supply with EU, UK, AUST adapters
1
microAB USB cable
1
Whip antenna, Wi-Fi 2.4/5GHz
-
A 64-bit Linux machine for application development and system customization, with at least:
-
4 GB of RAM
-
4 CPU cores
-
100 GB of free disk space
-
-
Additional components not included in the kit:
-
To program the firmware:
-
USB cable type A to microUSB
-
or FAT-formatted microSD card
-
or USB mass storage
-
-
To access the demo remotely:
-
Ethernet cable or whip antenna, Wi-Fi 2.4/5GHz
-
An IPhone or Android phone
-
-