-
The keyboard (KPP) component does not allow line selection. All lines are enabled by default.
-
Support for the following platforms is still beta:
-
ConnectCore 91
There may be some missing device trees and unknown default values. Some components and pad configurations may change in a future revision for this platform.
-
-
Designs using a CCMP13 or CCMP15 as base platform and compatible with CC6UL platforms allow to add two I2C interfaces when only one is compatible: I2C3 for the CCMP13 and I2C2 for the CCMP15.
- Get started
-
Digi Embedded Yocto
- Release notes
- Application development
- Yocto system development
- Storage layout
- Boot
- Update firmware
- Read-only root file system
- Network failover and recovery
- System monitor
- System watchdog
- Containers
- U-Boot bootloader
- Machine Learning / AI
- Real time Linux
- Simulate a SOM variant
- Recover your device
- ConnectCore Cloud Services
-
Linux kernel BSP
- Device tree files and overlays
- Pin multiplexing (IOMUX)
- ADC
- Audio
- Backlight
- Bluetooth
- Camera
- CAN
- Cellular
- Ethernet
- GPIO
- I2C
- mikroBUS™ socket
- MMC/SD/SDIO
- NAND
- OTP bits
- PCI Express (PCIe)
- PMIC
- Power management
- PWM
- Real-Time Clock (RTC)
- SPI
- Thermal monitor
- Touch screen
- UART
- USB
- Video
- Watchdog
- Wi-Fi
- XBee socket
- Digi TrustFence for Yocto
- Digi ConnectCore Smart IOmux
- Hardware
- Additional resources