Embedded
  • Nav
ConnectCore 8M Mini
Version
  • Get started
    • Step 1 - Requirements
    • Step 2 - Set up the hardware
    • Step 3 - Program the Yocto firmware
    • Step 4 - Create your first applications
    • Next steps
  • Digi Embedded Yocto
    • Release notes
      • Release changelog
      • Known issues and limitations
      • Support contact information
    • Application development
      • Digi ADE
        • Set up the development environment
        • Create a C/C++ project
        • Customize project build options
        • Build a project
        • Launch remote applications
      • Qt Creator
        • Install Qt
        • Configure Qt Creator
        • Create a Qt quick application
      • Command line
        • Install a pre-compiled toolchain
        • Create and build a "Hello world" application
        • Launch the application
      • Recovery library (firmware update)
      • Digi APIx for embedded
        • Set up your project for Digi APIX
        • ADC API
        • CAN API
        • GPIO API
        • I2C API
        • PWM API
        • Power management API
        • SPI API
        • Watchdog API
        • Define interface aliases
      • Cloud Connector
        • Set up your project for Cloud Connector
        • Start Cloud Connector
        • Receive data from Remote Manager
        • Send data to Remote Manager
        • Typed data - data points
        • Untyped data - binary data points
      • WPE WebKit web browser
        • Build WPE WebKit image
        • Use WPE WebKit
        • Include WebKit in dey-image-qt
      • XBee libraries
      • Develop Cortex-M applications
    • Yocto system development
      • Set up workstation
        • Set up Linux PC
        • Set up Docker container (Linux)
        • Set up Docker container (Windows)
      • Install Digi Embedded Yocto
      • Create and build projects
      • Boot the system
      • Customize the root file system
        • Configure network settings
        • Manage user accounts
      • Customize the kernel and DT
        • Make permanent changes
        • Make temporary changes
        • Build externally
        • Deploy the kernel on your target
      • Custom carrier board
        • Add a new custom machine
        • Carrier board version and ID
    • ConnectCore demo
      • Get started
        • 1. Requirements
        • 2. Set up the hardware
        • 3. Program the WPE WebKit image
        • 4. Manage your device
      • Local ConnectCore demo
        • Monitor the device
        • Test multimedia
        • Manage the device
      • Remote ConnectCore demo
        • Log in
        • Select your device
        • Monitor the device
        • Review historical data
        • Manage the device
        • View account data usage
    • Storage layout
      • Change the partition table
    • Update firmware
      • Program firmware using Fastboot
      • Program firmware from Linux
      • Program firmware from U-Boot
      • Program MCA firmware
    • Dual boot
    • Read-only root file system
    • Network failover and recovery
    • System monitor
    • System watchdog
    • U-Boot bootloader
      • Environment variables
      • Digi U-Boot custom commands
        • Direct boot
        • Firmware update
        • MMC extended CSD register
      • Configuration options
        • Secure console options
      • U-Boot files by variant
    • Machine Learning / AI
      • ConnectCore Voice
      • Google Coral
        • Get started with Google Coral
        • Test sample applications
        • Add Google Coral to DEY
      • eIQ machine learning
    • Amazon Web Services (AWS) IoT
      • Get started with AWS IoT
      • Get started with Greengrass
      • Create an AWS IoT image
      • AWS IoT device SDK
    • Digi Remote Manager
      • Connect to Remote Manager
      • Monitor the system
      • Update the firmware with Remote Manager
      • Access the file system
      • Get device information
      • Automate operations
      • Advanced remote configuration
    • Simulate a SOM variant
    • Recover your device
  • Linux kernel BSP
    • Device tree files and overlays
      • Create device tree overlays
    • Pin multiplexing (IOMUX)
    • ADC
      • Analog comparator
    • Audio
    • Backlight
    • Bluetooth
      • Bluetooth classic
      • Bluetooth Low Energy
    • Camera
    • CAN
    • Cellular
    • Cryptochip
    • Cryptographic accelerator (CAAM)
    • Ethernet
    • GPIO
    • I2C
    • Micro Controller Assist (MCA)
      • MCA core functionality
      • MCA configuration tool
      • MCA management application
      • MCA I/O pads
      • MCA ADC
      • MCA GPIO
      • MCA keypad
      • MCA LEDs
      • MCA power key input
      • MCA PWM
      • MCA RTC
      • MCA UART serial port
      • MCA watchdog
    • MMC/SD/SDIO
    • OTP bits
    • PCI Express (PCIe)
    • Power management
    • PWM
    • RAM layout
    • SPI
    • Thermal monitor
    • Touch screen
    • UART
    • USB
      • Using the USB Host port
      • Using the USB port (as device)
    • Video
      • HDMI
      • LVDS
    • Watchdog
    • Wi-Fi
      • Configuration
      • Get started with Wi-Fi
      • Configuration modes
        • Client infrastructure mode
        • Access point mode
        • Wi-Fi Direct
        • Concurrent modes
      • Network bridging
      • Regulatory domains
      • Wi-Fi test mode
    • XBee sockets
  • Digi TrustFence
    • Enable TrustFence in DEY
    • Secure boot
      • Digital signature overview
      • Secure boot overview
        • Image authentication
        • Image encryption
      • Set up secure boot
      • Standalone setup
    • Partition encryption
    • SELinux
    • Secure storage
    • Tamper detection
      • Tamper pins
      • Tamper-detection interfaces
      • Tamper response
      • Power and tamper response
      • Configure the tamper interfaces
      • Tamper_cfg command reference
    • Secure JTAG
    • Secure console modes
    • Secure build environments
    • Secure firmware update
    • Summary of TrustFence keys
      • Revoke a key
    • Advanced
      • Manually create a PKI
  • Digi ConnectCore Smart IOmux
    • Download and install Smart IOmux
    • Get started
    • Work with designs
      • Create a new design
      • Create a cross-platform design
        • Work with cross-platform designs
      • Load a saved design
      • Save a design
      • Export a design
      • Export a device tree
    • Work with components
      • Add components
      • Remove components
      • Sort components
      • Edit components
      • Get device tree
    • Configure your design
      • Change IOmux pad
      • Lock an IOmux pad
      • Change the IOmux electrical value
      • Review your design in Table view
      • Resolve pad conflicts
    • Working modes
      • Configuration view
      • Device tree view
      • Table view
    • Update Digi ConnectCore Smart IOmux
      • View change log
    • Additional resources
      • Known issues and limitations
  • Hardware
    • Hardware reference manuals
    • Compatibility guide
    • Performance and power benchmarking
    • Design files
    • SOM variants
  • Additional resources
    • Embedded systems terminology
    • Glossary of cryptography terms
    • Reference materials
ConnectCore 8M Mini
Version
  • Get started
    • Step 1 - Requirements
    • Step 2 - Set up the hardware
    • Step 3 - Program the Yocto firmware
    • Step 4 - Create your first applications
    • Next steps
  • Digi Embedded Yocto
    • Release notes
      • Release changelog
      • Known issues and limitations
      • Support contact information
    • Application development
      • Digi ADE
        • Set up the development environment
        • Create a C/C++ project
        • Customize project build options
        • Build a project
        • Launch remote applications
      • Qt Creator
        • Install Qt
        • Configure Qt Creator
        • Create a Qt quick application
      • Command line
        • Install a pre-compiled toolchain
        • Create and build a "Hello world" application
        • Launch the application
      • Recovery library (firmware update)
      • Digi APIx for embedded
        • Set up your project for Digi APIX
        • ADC API
        • CAN API
        • GPIO API
        • I2C API
        • PWM API
        • Power management API
        • SPI API
        • Watchdog API
        • Define interface aliases
      • Cloud Connector
        • Set up your project for Cloud Connector
        • Start Cloud Connector
        • Receive data from Remote Manager
        • Send data to Remote Manager
        • Typed data - data points
        • Untyped data - binary data points
      • WPE WebKit web browser
        • Build WPE WebKit image
        • Use WPE WebKit
        • Include WebKit in dey-image-qt
      • XBee libraries
      • Develop Cortex-M applications
    • Yocto system development
      • Set up workstation
        • Set up Linux PC
        • Set up Docker container (Linux)
        • Set up Docker container (Windows)
      • Install Digi Embedded Yocto
      • Create and build projects
      • Boot the system
      • Customize the root file system
        • Configure network settings
        • Manage user accounts
      • Customize the kernel and DT
        • Make permanent changes
        • Make temporary changes
        • Build externally
        • Deploy the kernel on your target
      • Custom carrier board
        • Add a new custom machine
        • Carrier board version and ID
    • ConnectCore demo
      • Get started
        • 1. Requirements
        • 2. Set up the hardware
        • 3. Program the WPE WebKit image
        • 4. Manage your device
      • Local ConnectCore demo
        • Monitor the device
        • Test multimedia
        • Manage the device
      • Remote ConnectCore demo
        • Log in
        • Select your device
        • Monitor the device
        • Review historical data
        • Manage the device
        • View account data usage
    • Storage layout
      • Change the partition table
    • Update firmware
      • Program firmware using Fastboot
      • Program firmware from Linux
      • Program firmware from U-Boot
      • Program MCA firmware
    • Dual boot
    • Read-only root file system
    • Network failover and recovery
    • System monitor
    • System watchdog
    • U-Boot bootloader
      • Environment variables
      • Digi U-Boot custom commands
        • Direct boot
        • Firmware update
        • MMC extended CSD register
      • Configuration options
        • Secure console options
      • U-Boot files by variant
    • Machine Learning / AI
      • ConnectCore Voice
      • Google Coral
        • Get started with Google Coral
        • Test sample applications
        • Add Google Coral to DEY
      • eIQ machine learning
    • Amazon Web Services (AWS) IoT
      • Get started with AWS IoT
      • Get started with Greengrass
      • Create an AWS IoT image
      • AWS IoT device SDK
    • Digi Remote Manager
      • Connect to Remote Manager
      • Monitor the system
      • Update the firmware with Remote Manager
      • Access the file system
      • Get device information
      • Automate operations
      • Advanced remote configuration
    • Simulate a SOM variant
    • Recover your device
  • Linux kernel BSP
    • Device tree files and overlays
      • Create device tree overlays
    • Pin multiplexing (IOMUX)
    • ADC
      • Analog comparator
    • Audio
    • Backlight
    • Bluetooth
      • Bluetooth classic
      • Bluetooth Low Energy
    • Camera
    • CAN
    • Cellular
    • Cryptochip
    • Cryptographic accelerator (CAAM)
    • Ethernet
    • GPIO
    • I2C
    • Micro Controller Assist (MCA)
      • MCA core functionality
      • MCA configuration tool
      • MCA management application
      • MCA I/O pads
      • MCA ADC
      • MCA GPIO
      • MCA keypad
      • MCA LEDs
      • MCA power key input
      • MCA PWM
      • MCA RTC
      • MCA UART serial port
      • MCA watchdog
    • MMC/SD/SDIO
    • OTP bits
    • PCI Express (PCIe)
    • Power management
    • PWM
    • RAM layout
    • SPI
    • Thermal monitor
    • Touch screen
    • UART
    • USB
      • Using the USB Host port
      • Using the USB port (as device)
    • Video
      • HDMI
      • LVDS
    • Watchdog
    • Wi-Fi
      • Configuration
      • Get started with Wi-Fi
      • Configuration modes
        • Client infrastructure mode
        • Access point mode
        • Wi-Fi Direct
        • Concurrent modes
      • Network bridging
      • Regulatory domains
      • Wi-Fi test mode
    • XBee sockets
  • Digi TrustFence
    • Enable TrustFence in DEY
    • Secure boot
      • Digital signature overview
      • Secure boot overview
        • Image authentication
        • Image encryption
      • Set up secure boot
      • Standalone setup
    • Partition encryption
    • SELinux
    • Secure storage
    • Tamper detection
      • Tamper pins
      • Tamper-detection interfaces
      • Tamper response
      • Power and tamper response
      • Configure the tamper interfaces
      • Tamper_cfg command reference
    • Secure JTAG
    • Secure console modes
    • Secure build environments
    • Secure firmware update
    • Summary of TrustFence keys
      • Revoke a key
    • Advanced
      • Manually create a PKI
  • Digi ConnectCore Smart IOmux
    • Download and install Smart IOmux
    • Get started
    • Work with designs
      • Create a new design
      • Create a cross-platform design
        • Work with cross-platform designs
      • Load a saved design
      • Save a design
      • Export a design
      • Export a device tree
    • Work with components
      • Add components
      • Remove components
      • Sort components
      • Edit components
      • Get device tree
    • Configure your design
      • Change IOmux pad
      • Lock an IOmux pad
      • Change the IOmux electrical value
      • Review your design in Table view
      • Resolve pad conflicts
    • Working modes
      • Configuration view
      • Device tree view
      • Table view
    • Update Digi ConnectCore Smart IOmux
      • View change log
    • Additional resources
      • Known issues and limitations
  • Hardware
    • Hardware reference manuals
    • Compatibility guide
    • Performance and power benchmarking
    • Design files
    • SOM variants
  • Additional resources
    • Embedded systems terminology
    • Glossary of cryptography terms
    • Reference materials

Digi Embedded Yocto Board Support Package

  • Device tree files and overlays

  • Pin multiplexing (IOMUX)

  • Analog-to-Digital Converter (ADC)

  • Audio

  • Backlight

  • Bluetooth

  • Camera

  • Controller Area Network (CAN)

  • Cellular

  • Cryptochip

  • Cryptographic Accelerator and Assurance Module (CAAM)

  • Ethernet

  • General Purpose Input/Output (GPIO)

  • I2C

  • Micro Controller Assist (MCA)

  • MMC/SD/SDIO

  • One-time programmable (OTP) bits

  • PCI Express (PCIe)

  • Power management

  • Pulse-width Modulation (PWM)

  • RAM layout

  • Serial Peripheral Interface (SPI)

  • Thermal monitor

  • Touch screen

  • Universal Asynchronous Receiver/Transmitter (UART)

  • Universal Serial Bus (USB)

  • Video

  • Watchdog

  • Wi-Fi

  • XBee sockets

Digi Embedded Yocto Board Support Package:

This topic for another platform?

  • ConnectCore 8M Nano
  • ConnectCore 6UL
  • ConnectCore 8X
  • ConnectCore 6
  • ConnectCore 6 Plus
Scroll to top of page
Product page More documentation Official site About Digi Contact us Support
©2024 Digi International Inc. All rights reserved.
Site last generated: Oct 30, 2024
Digi International Inc.