SOM variants

For information on available variants, see the Part Numbers & Accessories section of the ConnectCore 93 product page.

See U-Boot files by variant for a list of U-Boot files associated with each variant type.

You can find the variant number of your module on the serial console boot log:

U-Boot SPL dub-2024.04-r2.2+g9218b07cddd+p0 (Feb 24 2025 - 15:03:54 +0000)
SOC: 0xa1009300
LC: 0x2040010
PMIC: PCA9451A
PMIC: Over Drive Voltage Mode
M33 prepare ok
Normal Boot
Trying to boot from BOOTROM
Boot Stage: Primary boot
image offset 0x0, pagesize 0x200, ivt offset 0x0
Load image from 0x52800 by ROM_API
NOTICE:  TRDC init done
NOTICE:  BL31: v2.10.0  (release):android-15.0.0_1.0.0-rc3-0-g1b27ee3ed-dirty
NOTICE:  BL31: Built : 15:03:54, Feb 24 2025

U-Boot dub-2024.04-r2.2+g9218b07cddd+p0 (Feb 24 2025 - 15:03:54 +0000)
Reset Status: POR
CPU:   NXP i.MX93(52) Rev1.1 A55 at 1700 MHz
CPU:   Industrial temperature grade  (-40C to 105C) at 40C
DRAM:  992 MiB
Core:  221 devices, 34 uclasses, devicetree: separate
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... OK
[*]-Video Link 0 (1920 x 1080)
       [0] lcd-controller@4ae30000, video
       [1] dsi@4ae10000, video_bridge
       [2] lt8912@48, panel
In:    serial
Out:   serial
Err:   serial
Model: Digi ConnectCore 93 Development Kit
ConnectCore 93 SOM variant 0x01: 992 MiB LPDDR4, Wi-Fi, Bluetooth
 Board version undefined, ID undefined
Boot:  MMC0
BuildInfo:
 - ELE firmware version 2.0.0-64d8ef47
flash target is MMC:0
Net:   eth0: ethernet@428a0000 [PRIME]
Fastboot: Normal
Normal Boot
Hit any key to stop autoboot:  0
=>

See also