For information on available variants, see the Part Numbers & Accessories section of the ConnectCore 93 product page.
See U-Boot files by variant for a list of U-Boot files associated with each variant type.
You can find the variant number of your module on the serial console boot log:
U-Boot SPL dub-2023.04-r3.2 (Jan 30 2024 - 10:57:23 +0000)
SOC: 0xa1009300
LC: 0x2040010
PMIC: Over Drive Voltage Mode
M33 prepare ok
Normal Boot
Trying to boot from BOOTROM
Boot Stage: Primary boot
image offset 0x0, pagesize 0x200, ivt offset 0x0
Load image from 0x4f400 by ROM_API
NOTICE: BL31: v2.8(release):lf-6.1.55-2.2.0-0-g08e9d4eef226-dirty
NOTICE: BL31: Built : 16:47:44, Jan 30 2024
U-Boot dub-2023.04-r3.2 (Jan 30 2024 - 10:57:23 +0000)
CPU: i.MX93(52) rev1.1 1700 MHz (running at 1692 MHz)
CPU: Industrial temperature grade (-40C to 105C) at 42C
Reset cause: POR (0x1)
DRAM: 992 MiB
Core: 202 devices, 29 uclasses, devicetree: separate
MMC: FSL_SDHC: 0, FSL_SDHC: 1
In: serial
Out: serial
Err: serial
Model: Digi ConnectCore 93 Development Kit
ConnectCore 93 SOM variant 0x01: 992 MiB LPDDR4, Wi-Fi, Bluetooth
Boot: MMC0
BuildInfo:
- ELE firmware version 0.1.0-44880904
flash target is MMC:0
Net: eth0: ethernet@428a0000 [PRIME]
Fastboot: Normal
Normal Boot
Hit any key to stop autoboot: 0
=>
See also
See Simulate a SOM variant for instructions on simulating via software a variant with less cores and RAM memory.