You can set up a native Linux PC or use a Digi Embedded Yocto Docker container. In both cases, the resulting environment enables cross-platform development for ConnectCore devices.
- Get started
-
Digi Embedded Yocto
- Release notes
- Application development
- Yocto system development
- ConnectCore demo
- Storage layout
- Update firmware
- Dual boot
- Read-only root file system
- Network failover and recovery
- System monitor
- System watchdog
- U-Boot bootloader
- Machine Learning / AI
- Amazon Web Services (AWS) IoT
- Digi Remote Manager
- Simulate a SOM variant
- Recover your device
-
Linux kernel BSP
- Device tree files and overlays
- Pin multiplexing (IOMUX)
- ADC
- Audio
- Backlight
- Bluetooth
- Camera
- CAN
- Cellular
- Cryptochip
- Cryptographic accelerator (CAAM)
- Ethernet
- GPIO
- I2C
- Micro Controller Assist (MCA)
- MMC/SD/SDIO
- OTP bits
- PCI Express (PCIe)
- Power management
- PWM
- RAM layout
- SPI
- Thermal monitor
- Touch screen
- UART
- USB
- Video
- Watchdog
- Wi-Fi
- XBee socket
- Digi TrustFence
- Digi ConnectCore Smart IOmux
- Hardware
- Additional resources
Set up your development workstation
Set up your development workstation:
This topic for another platform?