The following table lists the U-Boot file associated with each ConnectCore 8X variant:
CPU type | RAM size | SOC revision | U-Boot file | U-Boot defconfig |
---|---|---|---|---|
QuadXPlus |
2GB |
RevC |
||
RevB |
||||
1GB |
RevC |
|||
RevB |
||||
DualZ |
1GB |
RevC |
||
RevB |
||||
512MB |
RevC |
|||
RevB |
Check your variant CPU, SOC revision, and RAM size on the serial console boot log:
U-Boot dub-2020.04-r2.2 (Jan 18 2021 - 15:54:04 +0000)
CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 25C
DRAM: 2 GiB
MCA: HW_VER=1 FW_VER=1.01
MMC: FSL_SDHC: 0, FSL_SDHC: 1
In: serial
Out: serial
Err: serial
Model: Digi International ConnectCore 8X SBC Pro Board.
ConnectCore 8X SOM variant 0x02: 2 GiB LPDDR4, Wi-Fi, Bluetooth, MCA, Crypto-auth
Board version 3, ID 135
Boot: MMC0
BuildInfo:
- SCFW 56682d58, SECO-FW 0e4b9cee, IMX-MKIMAGE 8da5cd23, ATF c949a88
- U-Boot dub-2020.04-r2.2
flash target is MMC:0
Net: eth0: ethernet@5b040000 [PRIME], eth1: ethernet@5b050000
Fastboot: Normal
Normal Boot
Hit any key to stop autoboot: 0
=>
NXP released two revisions of the SOC silicon: revision B0 and revision C0. See SOC revisions for more information. |