Embedded
  • Nav
ConnectCore 6UL
Version
  • Welcome
    • What is Digi Embedded Yocto?
    • Release notes
      • Release changelog
      • Known issues and limitations
    • Support contact information
  • Evaluate ConnectCore
    • Get started
      • Step 1 - Requirements
      • Step 2 - Set up the hardware
      • Step 3 - Program the Yocto firmware
      • Step 4 - Create your first applications
      • Next steps
    • Pre-built images
      • Qt
      • LVGL
      • Core image base demo
    • Simulate a SOM variant
  • Develop applications
    • Digi ADE
      • Set up the development environment
      • Create a C/C++ project
      • Customize project build options
      • Build a project
      • Launch remote applications
      • Connect to your remote device
    • Develop with VS Code
    • Qt Creator
      • Install Qt
      • Configure Qt Creator
      • Create a Qt quick application
    • LVGL
      • Get started with LVGL
      • Customize the LVGL demo
      • Develop your own LVGL apps
    • Command line
      • Install a pre-compiled toolchain
      • Create and build a "Hello world" application
      • Launch the application
    • Libraries
      • Digi APIx
        • Set up your project for Digi APIX
        • ADC API
        • CAN API
        • GPIO API
        • I2C API
        • PWM API
        • Power management API
        • SPI API
        • Watchdog API
        • Define interface aliases
      • Digi IoT Mobile SDK
      • XBee libraries
      • Recovery library (firmware update)
  • Customize system
    • Yocto system development
    • Set up workstation
      • Set up Linux PC
      • Set up Docker container (Linux)
      • Set up Docker container (Windows)
    • Install Digi Embedded Yocto
    • Create and build projects
    • Make changes to your project
      • Create a custom Yocto layer
      • Methods
        • Make temporary changes
        • Make permanent changes
      • Customize the root file system
        • Configure network settings
        • Manage user accounts
      • Customize Linux
        • Change the kernel configuration
        • Device tree files
        • Pin multiplexing (IOMUX)
        • Create your board device tree
      • Customize U-Boot
      • Carrier board version and ID
      • Create an image recipe
      • SWU packages
        • Create SWU image
        • Include bootloader
        • Customize SWU installation
    • Read-only rootfs
    • Machine Learning / AI
    • Containers
      • LXC containers
      • Docker containers
    • Linux kernel BSP
      • ADC
        • Analog comparator
      • Audio
      • Backlight
      • Bluetooth
        • Bluetooth classic
        • Bluetooth Low Energy
      • Camera
      • CAN
      • Cellular
      • Cryptochip
      • Cryptographic accelerator (CAAM)
      • Ethernet
      • GPIO
      • I2C
      • I/O Expander
        • I/O Expander GPIO
      • Digi Microcontroller Assist™ (MCA)
        • MCA core functionality
        • MCA configuration tool
        • MCA management application
        • MCA I/O pads
        • MCA ADC
        • MCA GPIO
        • MCA power key input
        • MCA RTC
        • MCA watchdog
      • MMC/SD/SDIO
      • NAND
      • OTP bits
      • PMIC
      • Power management
      • PWM
      • Real-Time Clock (RTC)
      • SPI
      • Thermal monitor
      • Touch screen
      • UART
      • USB
        • Using the USB Host port
        • Using the USB port (as device)
      • Video
      • Watchdog
      • Wi-Fi
        • Configuration
        • Get started with Wi-Fi
        • Configuration modes
          • Client infrastructure mode
          • Access point mode
          • Wi-Fi Direct
          • Concurrent modes
        • Network bridging
        • Regulatory domains
        • Wi-Fi test mode
      • XBee socket
  • Deploy
    • Storage layout
      • Change the partition table
    • Update firmware
      • Deploy kernel and DT
      • Use system images
        • Program images using Fastboot
        • Program images from U-Boot
      • Use SWU packages
        • Program SWU (dual boot)
        • Program SWU (single system)
      • Program I/O Expander firmware
      • Program MCA firmware
    • Boot
      • Boot the system
      • U-Boot bootloader
        • Environment variables
        • Digi U-Boot custom commands
          • Direct boot
          • Firmware update
        • Configuration options
          • Secure console options
        • U-Boot files by variant
      • Dual boot
      • Bootcount
  • Secure
    • Digi TrustFence for Yocto
      • Enable TrustFence in DEY
      • Secure boot
        • Digital signature overview
        • Secure boot overview
          • Image authentication
          • Image encryption
      • Set up secure boot
      • Standalone setup
      • Partition encryption
      • Secure storage
      • Tamper detection
        • Tamper pins
        • Tamper-detection interfaces
        • Tamper response
        • Power and tamper response
        • Configure the tamper interfaces
        • Tamper_cfg command reference
      • Secure JTAG
      • Secure console modes
      • Secure build environments
      • Secure firmware update
      • Summary of TrustFence keys
        • Revoke a key
      • Advanced
        • Manually create a PKI
    • ConnectCore Security Services
    • Glossary of cryptography terms
  • Manage
    • ConnectCore Cloud Services
      • Overview
        • Device components
        • Web services
      • Features
        • Connect to Remote Manager
        • Monitor the system
        • Manage your devices
        • Remotely update the firmware
        • Access the file system
        • Remote CLI
        • Automate operations
      • Device development
        • Provision your device
        • Set up your project for CCCS
        • Configure CCCS
        • Check daemon status
        • Receive data from Remote Manager
        • Send data to Remote Manager
          • Send typed data points
          • Send binary data points
        • Set maintenance state
        • Include CCCS applications in DEY
        • Optimize device data traffic
      • Web service development
        • Send data to devices
        • Monitor device data
        • Manage device file system
        • Execute commands
        • Update device firmware
      • ConnectCore Cloud Services demo
        • Get started
          • 1. Requirements
          • 2. Set up the hardware
          • 3. Program the image
          • 4. Manage your device
        • Remote demo
          • Log in
          • Select your device
          • Monitor the device
          • Review historical data
          • Manage the device
          • View account data usage
    • Network failover and recovery
    • Recover your device
  • Design your hardware
    • Hardware reference manuals
    • Design guidelines and checklist
    • Design files
    • SOM variants
    • Digi ConnectCore Smart IOmux
      • Download and install Smart IOmux
      • Get started
      • Work with designs
        • Create a new design
        • Create a cross-platform design
          • Work with cross-platform designs
        • Load a saved design
        • Save a design
        • Export a design
        • Export a device tree
      • Work with components
        • Add components
        • Remove components
        • Sort components
        • Edit components
        • Get device tree
      • Configure your design
        • Change the design name
        • Change the platform variant
        • Change IOmux pad
        • Lock an IOmux pad
        • Change the IOmux electrical value
        • Review your design in Table view
        • Resolve pad conflicts
      • Working modes
        • Home view
        • Configuration view
        • Device tree view
        • Table view
        • Graphic view
      • Update Digi ConnectCore Smart IOmux
        • View change log
      • Additional resources
        • Known issues and limitations
ConnectCore 6UL
Version
  • Welcome
    • What is Digi Embedded Yocto?
    • Release notes
      • Release changelog
      • Known issues and limitations
    • Support contact information
  • Evaluate ConnectCore
    • Get started
      • Step 1 - Requirements
      • Step 2 - Set up the hardware
      • Step 3 - Program the Yocto firmware
      • Step 4 - Create your first applications
      • Next steps
    • Pre-built images
      • Qt
      • LVGL
      • Core image base demo
    • Simulate a SOM variant
  • Develop applications
    • Digi ADE
      • Set up the development environment
      • Create a C/C++ project
      • Customize project build options
      • Build a project
      • Launch remote applications
      • Connect to your remote device
    • Develop with VS Code
    • Qt Creator
      • Install Qt
      • Configure Qt Creator
      • Create a Qt quick application
    • LVGL
      • Get started with LVGL
      • Customize the LVGL demo
      • Develop your own LVGL apps
    • Command line
      • Install a pre-compiled toolchain
      • Create and build a "Hello world" application
      • Launch the application
    • Libraries
      • Digi APIx
        • Set up your project for Digi APIX
        • ADC API
        • CAN API
        • GPIO API
        • I2C API
        • PWM API
        • Power management API
        • SPI API
        • Watchdog API
        • Define interface aliases
      • Digi IoT Mobile SDK
      • XBee libraries
      • Recovery library (firmware update)
  • Customize system
    • Yocto system development
    • Set up workstation
      • Set up Linux PC
      • Set up Docker container (Linux)
      • Set up Docker container (Windows)
    • Install Digi Embedded Yocto
    • Create and build projects
    • Make changes to your project
      • Create a custom Yocto layer
      • Methods
        • Make temporary changes
        • Make permanent changes
      • Customize the root file system
        • Configure network settings
        • Manage user accounts
      • Customize Linux
        • Change the kernel configuration
        • Device tree files
        • Pin multiplexing (IOMUX)
        • Create your board device tree
      • Customize U-Boot
      • Carrier board version and ID
      • Create an image recipe
      • SWU packages
        • Create SWU image
        • Include bootloader
        • Customize SWU installation
    • Read-only rootfs
    • Machine Learning / AI
    • Containers
      • LXC containers
      • Docker containers
    • Linux kernel BSP
      • ADC
        • Analog comparator
      • Audio
      • Backlight
      • Bluetooth
        • Bluetooth classic
        • Bluetooth Low Energy
      • Camera
      • CAN
      • Cellular
      • Cryptochip
      • Cryptographic accelerator (CAAM)
      • Ethernet
      • GPIO
      • I2C
      • I/O Expander
        • I/O Expander GPIO
      • Digi Microcontroller Assist™ (MCA)
        • MCA core functionality
        • MCA configuration tool
        • MCA management application
        • MCA I/O pads
        • MCA ADC
        • MCA GPIO
        • MCA power key input
        • MCA RTC
        • MCA watchdog
      • MMC/SD/SDIO
      • NAND
      • OTP bits
      • PMIC
      • Power management
      • PWM
      • Real-Time Clock (RTC)
      • SPI
      • Thermal monitor
      • Touch screen
      • UART
      • USB
        • Using the USB Host port
        • Using the USB port (as device)
      • Video
      • Watchdog
      • Wi-Fi
        • Configuration
        • Get started with Wi-Fi
        • Configuration modes
          • Client infrastructure mode
          • Access point mode
          • Wi-Fi Direct
          • Concurrent modes
        • Network bridging
        • Regulatory domains
        • Wi-Fi test mode
      • XBee socket
  • Deploy
    • Storage layout
      • Change the partition table
    • Update firmware
      • Deploy kernel and DT
      • Use system images
        • Program images using Fastboot
        • Program images from U-Boot
      • Use SWU packages
        • Program SWU (dual boot)
        • Program SWU (single system)
      • Program I/O Expander firmware
      • Program MCA firmware
    • Boot
      • Boot the system
      • U-Boot bootloader
        • Environment variables
        • Digi U-Boot custom commands
          • Direct boot
          • Firmware update
        • Configuration options
          • Secure console options
        • U-Boot files by variant
      • Dual boot
      • Bootcount
  • Secure
    • Digi TrustFence for Yocto
      • Enable TrustFence in DEY
      • Secure boot
        • Digital signature overview
        • Secure boot overview
          • Image authentication
          • Image encryption
      • Set up secure boot
      • Standalone setup
      • Partition encryption
      • Secure storage
      • Tamper detection
        • Tamper pins
        • Tamper-detection interfaces
        • Tamper response
        • Power and tamper response
        • Configure the tamper interfaces
        • Tamper_cfg command reference
      • Secure JTAG
      • Secure console modes
      • Secure build environments
      • Secure firmware update
      • Summary of TrustFence keys
        • Revoke a key
      • Advanced
        • Manually create a PKI
    • ConnectCore Security Services
    • Glossary of cryptography terms
  • Manage
    • ConnectCore Cloud Services
      • Overview
        • Device components
        • Web services
      • Features
        • Connect to Remote Manager
        • Monitor the system
        • Manage your devices
        • Remotely update the firmware
        • Access the file system
        • Remote CLI
        • Automate operations
      • Device development
        • Provision your device
        • Set up your project for CCCS
        • Configure CCCS
        • Check daemon status
        • Receive data from Remote Manager
        • Send data to Remote Manager
          • Send typed data points
          • Send binary data points
        • Set maintenance state
        • Include CCCS applications in DEY
        • Optimize device data traffic
      • Web service development
        • Send data to devices
        • Monitor device data
        • Manage device file system
        • Execute commands
        • Update device firmware
      • ConnectCore Cloud Services demo
        • Get started
          • 1. Requirements
          • 2. Set up the hardware
          • 3. Program the image
          • 4. Manage your device
        • Remote demo
          • Log in
          • Select your device
          • Monitor the device
          • Review historical data
          • Manage the device
          • View account data usage
    • Network failover and recovery
    • Recover your device
  • Design your hardware
    • Hardware reference manuals
    • Design guidelines and checklist
    • Design files
    • SOM variants
    • Digi ConnectCore Smart IOmux
      • Download and install Smart IOmux
      • Get started
      • Work with designs
        • Create a new design
        • Create a cross-platform design
          • Work with cross-platform designs
        • Load a saved design
        • Save a design
        • Export a design
        • Export a device tree
      • Work with components
        • Add components
        • Remove components
        • Sort components
        • Edit components
        • Get device tree
      • Configure your design
        • Change the design name
        • Change the platform variant
        • Change IOmux pad
        • Lock an IOmux pad
        • Change the IOmux electrical value
        • Review your design in Table view
        • Resolve pad conflicts
      • Working modes
        • Home view
        • Configuration view
        • Device tree view
        • Table view
        • Graphic view
      • Update Digi ConnectCore Smart IOmux
        • View change log
      • Additional resources
        • Known issues and limitations

Get started

  • Step 1 - Requirements

  • Step 2 - Set up the hardware

  • Step 3 - Program the Yocto firmware

  • Step 4 - Create your first applications

  • Next steps

Get started:

This topic for another platform?

  • ConnectCore MP25
  • ConnectCore 91
  • ConnectCore 93
  • ConnectCore 8X
Scroll to top of page
Product page More documentation Official site About Digi Contact us Support
©2025 Digi International Inc. All rights reserved.
Digi International Inc.