-
The keyboard (KPP) component does not allow line selection. All lines are enabled by default.
-
Support for the ConnectCore 8M Nano platform is still beta, so there are some missing device trees and unknown default values. For this reason, some components and pad configurations may change in a future revision.
- Get started
-
Digi Embedded Yocto
- Release notes
- Application development
- Yocto system development
- ConnectCore demo
- Storage layout
- Update firmware
- Dual boot
- Read-only root file system
- Network failover and recovery
- System monitor
- System watchdog
- U-Boot bootloader
- Machine Learning / AI
- Amazon Web Services (AWS) IoT
- Digi Remote Manager
- Simulate a SOM variant
- Recover your device
-
Linux kernel BSP
- Device tree files and overlays
- Pin multiplexing (IOMUX)
- ADC
- Audio
- Backlight
- Bluetooth
- Camera
- CAN
- Cellular
- Cryptochip
- Cryptographic accelerator (CAAM)
- Ethernet
- GPIO
- I2C
- Micro Controller Assist (MCA)
- MMC/SD/SDIO
- OTP bits
- Power management
- PWM
- RAM layout
- SPI
- Thermal monitor
- Touch screen
- UART
- USB
- Video
- Watchdog
- Wi-Fi
- XBee sockets
- Digi TrustFence
- Digi ConnectCore Smart IOmux
- Hardware
- Additional resources
Known issues and limitations
This topic for another platform?