Version

• Get started
  • Step 1 - Requirements
  • Step 2 - Set up the hardware
  • Step 3 - Program the Yocto firmware
  • Step 4 - Create your first applications
  • Next steps
• Digi Embedded Yocto
  • Application development
    • Digi ADE
      • Set up the development environment
      • Create a C/C++ project
      • Customize project build options
      • Build a project
      • Launch remote applications
    • Qt Creator
      • Install Qt
      • Configure Qt Creator
      • Create a Qt quick application
    • Command line
      • Install a pre-compiled toolchain
      • Create and build a "Hello world" application
      • Launch the application
    • Recovery library (firmware update)
    • Digi APIx for embedded
      • Set up your project for Digi APIX
      • ADC API
      • CAN API
      • GPIO API
      • I2C API
      • PWM API
      • SPI API
      • Watchdog API
      • Define interface aliases
    • Cloud Connector
      • Set up your project for Cloud Connector
      • Start Cloud Connector
      • Receive data from Remote Manager
      • Send data to Remote Manager
      • Typed data - data points
      • Untyped data - binary data points
  • Yocto system development
    • Set up workstation
    • Install Digi Embedded Yocto
    • Create and build projects
    • Update firmware
      • Program firmware from Linux
      • Program firmware from U-Boot
      • Update firmware with Remote Manager
      • I/O Expander firmware update
    • Partitioning
      • NAND flash layout
      • Change partition table
    • Boot images
    • Customize the root filesystem
      • Configure network settings
      • Manage user accounts
    • Amazon Web Services (AWS) IoT
      • Get started with AWS IoT
      • Get started with Greengrass
      • Create an AWS IoT image
      • AWS IoT device SDK
    • Digi Remote Manager
      • Connect to Remote Manager
      • Monitor the system
      • Access the filesystem
      • Get device information
      • Automate operations
      • Advanced remote configuration
    • Network failover
    • U-Boot bootloader
      • Environment variables
      • Digi U-Boot custom commands
      • Direct boot
      • Firmware update
      • Configuration options
    • Custom carrier board
      • Add a new custom machine
      • Carrier board version and ID
    • Kernel development workflows
      • Using a mainline Linux kernel
      • Build custom Yocto kernel recipe
      • Build standalone/external images
      • Make quick changes in the Yocto devshell
      • Deploy the kernel on your target
  • Known issues and limitations
  • Recover your device
  • Enable support for a Fusion display
• Linux kernel BSP
  • Device tree files
  • Pin multiplexing (IOMUX)
  • ADC
    • Analog comparator
  • Audio
  • Backlight
  • Bluetooth
    • Bluetooth classic
    • Bluetooth Low Energy
  • Camera
  • CAN
  • Cellular
  • Cryptochip
  • Cryptographic accelerator
  • Ethernet
  • GPIO
  • I2C
  • I/O Expander
    • I/O Expander GPIO
  • Micro Controller Assist (MCA)
    • MCA core functionality
    • MCA configuration tool
    • MCA GPIO
    • MCA UART serial port
    • MCA power key input
    • MCA RTC
    • MCA watchdog
    • MCA management application
  • MMC/SD/SDIO
  • OTP bits
  • PF3000 Power Management IC (PMIC)
  • PWM
  • SPI
  • Touch screen
  • UART
  • USB
    • Using the USB Host port
    • Using the USB port (as device)
  • Video
  • Wi-Fi
    • Configuration
    • Get started with Wi-Fi
    • Configuration modes
      • Client infrastructure mode
      • Access point mode
      • Wi-Fi Direct
      • Concurrent modes
    • Wireless-to-Ethernet network bridging
    • Regulatory domains
  • XBee socket
• Digi TrustFence for Yocto
  • Enable TrustFence in DEY
  • Secure boot
    • Digital signature overview
    • Secure boot overview
      • Image authentication
      • Image encryption
    • Set up secure boot
    • Standalone setup
  • Partition encryption
  • Tamper-detection interface
    • Tamper pins
    • Tamper-detection interfaces
    • Tamper response
    • Power and tamper response
    • Configure the tamper interfaces
    • Tamper_cfg command reference
  • Secure JTAG
  • Secure console modes
  • Secure build environments
  • Secure firmware update
  • FIPS-capable OpenSSL
  • Summary of TrustFence keys
    • Revoke a key
  • Advanced
    • Manually create a PKI
• Hardware
  • Hardware reference manuals
  • Hardware variants
• Additional resources
  • Digi ConnectCore Smart IOmux
  • Embedded systems terminology
  • Glossary of cryptography terms
  • Reference materials

On this page:

This topic for another platform?

• ConnectCore 8X
• ConnectCore 6
• ConnectCore 6 Plus