| Smart part number | Part number | SOM variant | Description | Wi-Fi / Bluetooth | U-Boot file |
|---|---|---|---|---|---|
CC-WMX-JN58-NE |
50001939-01 |
0x02 |
ConnectCore for i.MX6UL, 528 MHz, Industrial Temp, 256 MB SLC NAND, 256 MB DDR3, Dual 10/100 Ethernet, 802.11a/b/g/n/ac, Bluetooth 4.2, ANT+ |
|
u-boot-ccimx6ulstarter.imx u-boot-ccimx6ulsbc.imx |
CC-MX-JN58-Z1 |
50001939-02 |
0x03 |
ConnectCore for i.MX6UL, 528 MHz, Industrial Temp, 256 MB SLC NAND, 256 MB DDR3, Dual 10/100 Ethernet |
|
u-boot-ccimx6ulstarter.imx u-boot-ccimx6ulsbc.imx |
CC-WMX-JN7A-NE |
50001939-04 |
0x04 |
ConnectCore for i.MX6UL, 528 MHz, Industrial Temp, 1GB SLC NAND, 1 GB DDR3, Dual 10/100 Ethernet, 802.11a/b/g/n/ac, Bluetooth 4.2, ANT+ |
|
u-boot-ccimx6ulstarter1GB.imx u-boot-ccimx6ulsbc1GB.imx |
CC-MX-JN7A-Z1 |
50001939-05 |
0x05 |
ConnectCore for i.MX6UL-2, 528 MHz, Industrial Temp, 1GB SLC NAND, 1 GB DDR3, Dual 10/100 Ethernet |
|
u-boot-ccimx6ulstarter1GB.imx u-boot-ccimx6ulsbc1GB.imx |
You can find the variant number of your module on the serial console boot log:
U-Boot dub-2017.03-r2.1-git+g96bce8e (Oct 26 2018 - 09:51:55 +0000)
CPU: Freescale i.MX6UL rev1.1 528 MHz (running at 396 MHz)
CPU: Industrial temperature grade (-40C to 105C) at 55C
Reset cause: POR
I2C: ready
DRAM: 256 MiB
MCA: HW_VER=1 FW_VER=1.02
PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11
NAND: 256 MiB
MMC: FSL_SDHC: 0
In: serial
Out: serial
Err: serial
Model: Digi International ConnectCore 6UL SBC.
ConnectCore 6UL SOM variant 0x02: Industrial Ultralite 528MHz, 256MB NAND, 256MB DDR3, -40/+85C, Wireless, Bluetooth
Board: ConnectCore 6UL SBC Pro, version 3, ID 135
Boot device: NAND
Net: FEC0 [PRIME]
Hit any key to stop autoboot: 0
=>
