Digi Navigator application features

All features of the Digi Navigator are available from the main application screen.

  Item Description
1 Filters

Click Filters to display the types of filters that can be applied to Digi devices, services, and IP types.

  • Device Filters: A list of the Digi device types displays. All types are disabled by default, and when all are disabled, all types are displayed. To filter the devices by a certain type, click the bar to display only the selected types. See Filter devices for display in the Digi Navigator.

  • Services Filters: Not applicable for devices that do not support autodiscovery with Digi Navigator.

  • Setup IP Filters: Not applicable for devices that do not support autodiscovery with Digi Navigator.

2 Digi Remote Manager

Click Digi Remote Manager to launch Digi Remote Manager. See Access Digi Remote Manager from the Digi Navigator.

3 Specify a device

Expand the Specify a device section to enter the IP address of a Digi device. See Configure RealPort on a Digi device from the Digi Navigator.

4 List of discovered devices

Not applicable for devices that do not support autodiscovery with Digi Navigator.

5 Open

Click Open to access the web UI for the Digi device. See Access the web UI from the Digi Navigator.

6 Configure device for Realport

Click Configure device for Realport to configure the Digi device to use RealPort. See Configure RealPort on a Digi device from the Digi Navigator.

 

7 Configure this PC for RealPort

Click Configure this PC for RealPort to configure your computer to use RealPort. See Configure RealPort on a Digi device from the Digi Navigator.

 

8 RealPort Devices

Click RealPort Devices at the bottom of the screen to display a list of Digi devices that are configured to use RealPort. See Configure RealPort on a Digi device from the Digi Navigator.

9 Refresh

Click Refresh to update the list of the Digi devices that have RealPort enabled and configured.

10 Open Device Manager

Click Open Device Manager to open the Windows Properties dialog on your computer to access the configured COM ports. The number of COM ports configured for RealPort matches the number of serial ports on the device.