Filter devices for display in the Digi Navigator

You can use the Digi Navigator filters to determine the types of Digi devices you want to display. Only the devices that are powered on and are discoverable are included.

1. Make sure Digi Navigator is installed and the IX30 is powered and connected to your local network or computer with an Ethernet cable.

2. Launch the Digi Navigator.

3. Click Filters from the green toolbar to expand the toolbar and display the filter options.

   

4. In the Device Filters section, a list of the Digi device types display. All types are disabled by default, and when all are disabled, all types are displayed.

5. To filter the types that are displayed, click the enable slider for the types you want to display. Only the enabled types will display, and all other types remain disabled and do not display.

6. Click Filters at the bottom of the expanded toolbar to minimize the toolbar and hide the filters.