Power cycle feature

You can cycle the power to the devices connected to an AnywhereUSB Hub using one of the following methods. When the power is cycled, the power is turned off for 1 second and then turned back on.

Review the details of each method to determine which one you can use cycle the power.

 Power cycle action User type Tool
Admin Non-Admin Web UI

AnywhereUSB 

Manager

Service Mode

AnywhereUSB 

Manager

Standalone Mode

Cycle the power to all of the devices connected to one selected port.

See Cycle the power to a port on a Hub from the web UI.

 X   X    

Cycle the power to one selected device.

See Cycle the power to a USB device connected to the Hub from the AnywhereUSB Manager.

 X     X  
X X     X

Cycle the power to all devices in a group on a disconnect.

Enabled by default.

See Cycle the power to a device when it disconnects from a PC.

To disable this feature:

See Disable the power cycle on disconnect feature.

 Automatic if Enabled
X   X    

Disconnects happen when:

    

  • A device is manually disconnected from the Manager

 X     X  
X X     X

  • A group is manually disconnected from the Hub

 X     X  
X X     X

  • PC and/or Hub reboots

 Automatic if Enabled

  • PC and/or Hub loses connection to the network

 Automatic if Enabled