You are here: Digi Embedded Yocto > System development > Linux v4.1 Board Support Package > Devices and interfaces

Devices and interfaces

The following chapter describes the supported interfaces of the ConnectCore 6UL SBC Express:

Analog-to-digital converter (ADC)

Audio

Backlight

Bluetooth

Cryptographic accelerator and assurance module (CAAM)

Camera

Cellular

Controller area network (CAN)

Ethernet

Configure Ethernet network settings

General purpose input/output (GPIO)

I2C

I/O Expander

I/O Expander GPIO

Micro Controller Assist (MCA)

External 32.768 kHz output

MCA general purpose input/output (GPIO)

MCA power key input

MCA real-time clock (RTC)

MCA watchdog

MCA management application

Voltage reference 1.2 V

MMC/SD/SDIO

One-time programmable (OTP)

PF3000 Power management IC (PMIC)

Pulse-width modulation (PWM)

Serial peripheral interface (SPI)

Universal asynchronous receiver/transmitter (UART)

Universal serial bus (USB)

Using the USB host port

Using the USB port (as device)

Video

Wireless

Network configuration

Configure wireless network settings

Wi-Fi configuration

Wi-Fi link capabilities

Scanning

Wi-Fi link status

Configuration modes

Client infrastructure mode

Access point mode

Wi-Fi direct

Concurrent modes

Known issues and limitations

Wireless-to-Ethernet network bridging

 

© 2017 Digi International Inc. All rights reserved.
Devices and interfaces updated on 22 June 2017 12:51:16 PM