Network configuration

MAC addresses

Digi programs one MAC address during manufacturing of the SOM. This is the MAC address used for the wlan0 interface. The wireless chip supports up to three other virtual MAC addresses that you must program before use (otherwise they have default values). See Wireless virtual MAC addresses for instructions.

IP settings

Digi Embedded Yocto defines configuration macros to set some of the most commonly used network interface settings. See Customize the root file system. By default, wlan0 is configured to obtain a DHCP address.

You can also configure additional network interface settings by editing /etc/NetworkManager/system-connections/<Config_File. You can also use the nmcli tool, which is part of the NetworkManager package.