How do I update firmware on Digi One IAP using the web interface

The Digi One IAP can have the post and firmware installed using the web interface of the Digi One IAP.
After installing the post, the One IAP has to be rebooted.   Then install the IAP EOS firmware and the IAP must be rebooted again.
 
NOTE: When upgrading the EOS firmware.
You MUST upgrade to the latest POST image FIRST, then reboot before upgrading the EOS or your unit may stop functioning. If you have a POST version that starts with 82000779, the most recent POST is here on the website. If you have a POST version that starts with 82001178, then you have the Universal POST and you do NOT need to upgrade.
 
Digi One IAP 82000779_D.bin   POST:


http://ftp1.digi.com/support/firmware/82000779_d.bin
 
Digi One IAP 82000770_W1.bin Firmware:
http://ftp1.digi.com/support/firmware/82000770_W1.bin
 
Digi One IAP   Update Firmware web interface section:

User-added image
Installing the Digi One IAP 82000779_D.bin   POST:

  1. Open the web interface of the Digi One IAP
  2. Click the Update Firmware option
  3. Click the Update item and select Post
  4. Click Choose File and select the 82000779_D.bin file
  5. Click the Update button
  6. When completed, reboot the Digi One IAP

 
Installing the Digi One IAP 8200077_W1.bin   POST:

  1. Open the web interface of the Digi One IAP
  2. Click the Update Firmware option
  3. Click the Update item and select Firmware
  4. Click Choose File and select the 8200077_W1.bin  file
  5. Click the Update button
  6. When completed, reboot the Digi One IAP

 
 

Last updated: Jan 02, 2024

Filed Under

Network

Recently Viewed

No recently viewed articles

Did you find this article helpful?