How do I update firmware on Digi One IA using the web interface

The Digi One IA can have the post and firmware installed using the web interface of the Digi One IA.
After installing the post, the One IA has to be rebooted.   Then install the IA EOS firmware and the IA must be rebooted again.
 
NOTE: When upgrading to a new version of EOS firmware for your Device or Terminal Server product, if you need to update your POST code, it must be done BEFORE the firmware update.
NOTE: When upgrading to the 774_G or later version of firmware, if you have a 775 POST code already in your unit you MUST upgrade to the 775_F POST image FIRST or your unit may stop functioning. If your POST is universal POST part number 82001178, upgrading POST is not necessary.
 
Digi One IA 82000775_F.bin   POST:

http://ftp1.digi.com/support/firmware/82000775_F.bin
 

Digi One IA 82000774_W1.bin Firmware:

http://ftp1.digi.com/support/firmware/82000774_W1.bin
 

Digi One IA   Update Firmware web interface section:

User-added image
 
Installing the Digi One IA 82000775_F.bin   POST:

  1. Open the web interface of the Digi One IA
  2. Click the Update Firmware option
  3. Click the Update item and select Post
  4. Click Choose File and select the 82000775_F.bin file
  5. Click the Update button
  6. When completed, reboot the Digi One IA

 
Installing the Digi One IA 82000774_W1.bin EOS firmware:

  1. Open the web interface of the Digi One IA
  2. Click the Update Firmware option
  3. Click the Update item and select Firmware
  4. Click Choose File and select the 82000774_W1.bin  file
  5. Click the Update button
  6. When completed, reboot the Digi One IA

 
 
 
 

Last updated: Jan 02, 2024

Filed Under

Network

Recently Viewed

No recently viewed articles

Did you find this article helpful?