WPA2 enterprise Radius authentication e.g. with EAP-TLS is not a matter of the hardware.
CC6 and CC6UL hardware should be able to do it.
Its a matter of appropriate firmware setup. Digi does not provide instructions to do it.
You can find various standard Linux instructions in the internet how to set it up, e.g.:
https://linux.die.net/man/5/wpa_supplicant.conf
also for Radius:
http://openssl.6102.n7.nabble.com/Can-openssl-support-EAP-TLS-td2186.html
If you're looking to do authentication, freeradius will do EAP, and talk to openssl for the TLS part (and an LDAP server for the actual authentication and authorization).
http://freeradius.org/
Customers need to try it with the Digi starter board or SBC.
Last updated:
Sep 27, 2024