Select your product for firmware, drivers, software, knowledge base articles and manuals.
Connect the AUO 10.1" LVDS LCD display (not included, Digi P/N CC-ACC-LCDW-10) to the RGB PARALLEL connector on the top side of the board. Make sure the metal pads on the parallel connector are facing up. See documentation resources on how to configure the LCD interface by doing a search for LCD where you will find the information about LCD connection in the hardware section. https://www.digi.com/resources/documentation/digidocs/embedded/dey/2.6/cc6ul/bsp_r_video_6ul You can purchase the LCD Application Kit from Digi in the link below; https://www.digi.com/products/models/cc-acc-lcdw-10