Follow these steps to set up your ConnectCore 6 Plus SBC hardware:
-
Connect the serial adapter cable to the console port [CONS]. Then connect a serial cable from the adapter to the development computer.
-
Connect the Ethernet cable (not included) to the Ethernet port.
-
Connect the antenna to the UFL connector.
-
Connect an HDMI cable (not included) to the HDMI connector and then to an HDMI-compatible display.
-
Connect a USB mouse to the USB connector.
-
Add the appropriate plug and connect the power supply.
-
Ensure the BOOT micro-switches are both in the down position.