Fastboot is a protocol for communication between your device and a computer. It allows you to modify file system images over a USB connection, which is a quick way to update firmware during development. Fastboot requires the USB interface to work as 'device'.
Although it was originally developed for Android images, its implementation on the NXP UUU (Universal Update Utility) tool extends the functionality to any file type.
To update U-Boot via USB OTG using uuu and the Fastboot protocol:
-
Download the latest Universal Update Utility (UUU) tool, a software tool from NXP.
-
Place the uuu executable in a directory in your PATH, such as
/usr/bin
. -
Install
udev
rules to allow any user to run the uuu for accessing the USB port:$ sudo sh -c "uuu -udev >> /etc/udev/rules.d/99-uuu.rules" $ sudo udevadm control --reload-rules
-
Connect a micro USB cable to your development PC and the other end to the target USB OTG connector.
-
Reset the device by pressing the reset button on the board and immediately press any key in the serial terminal to stop the auto-boot process. The U-Boot bootloader prompt displays:
U-Boot dub-2017.03-r11.1 (Sep 29 2021 - 14:56:25 +0000) CPU: Freescale i.MX6Q rev1.6 at 792MHz CPU: Industrial temperature grade (-40C to 105C) at 38C Reset cause: POR I2C: ready DRAM: 1 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial Model: Digi International ConnectCore 6 Single Board Computer. ConnectCore 6 SOM variant 0x02: Consumer quad-core 1.2GHz, 4GB eMMC, 1GB DDR3, -20/+70C, Wireless, Bluetooth, Kinetis Board: ConnectCore 6 SBC, version 3, ID 129 Boot device: MMC4 PMIC: DA9063, Device: 0x61, Variant: 0x60, Customer: 0x00, Config: 0x56 flash target is MMC:0 Net: FEC [PRIME] Fastboot: Normal Hit any key to stop autoboot: 0 =>
Information in the console log may vary. -
On the target, in U-Boot, execute the following command:
=> fastboot 0
-
On your development PC, change to your Digi Embedded Yocto project’s deploy images folder:
$ cd tmp/deploy/images/ccimx6sbc/
-
Run the
install_linux_fw_uuu.sh
script with-h
parameter to check the syntax:$ ./install_linux_fw_uuu.sh -h ############################################################ # Linux firmware install through USB OTG # ############################################################ Usage: ./install_linux_fw_uuu.sh [options] Options: -h Show this help. -i <dey-image-name> Image name that prefixes the image filenames, such as 'dey-image-qt', 'dey-image-webkit', 'core-image-base'... Defaults to 'dey-image-qt' if not provided. -n No wait. Skips 10 seconds delay to stop script. -u <u-boot-filename> U-Boot filename. Auto-determined by variant if not provided.
-
To program the default image files (dey-image-qt):
$ ./install_linux_fw_uuu.sh
-
Once the firmware is installed, the device boots automatically. The default username is root with no password.