The Image Processing Unit (IPU) is designed to support video and graphics processing functions and to interface with video and still image sensors and displays.

The IPU driver provides the following software support:

  • Synchronous frame buffer driver

  • Display Interface (DI)

  • Display Processor (DP)

  • Image DMA Controller (IDMAC)

  • CMOS Sensor Interface (CSI)

  • Image Converter (IC)

Kernel configuration

You can manage the IPU driver support through the kernel configuration option:

  • Image Processing Unit Driver (CONFIG_MXC_IPU)

This option is enabled as built-in on the ConnectCore 6 kernel configuration file.

Kernel driver

The IPU drivers for the {cpu-family} are located at drivers/mxc/ipu3:

File Description

ipu_common.c

IPU common library functions

ipu_ic.c

IPU IC base driver

ipu_device.c

IPU driver device interface and fops functions

ipu_capture.c

IPU CSI capture base driver

ipu_disp.c

IPU display functions

ipu_calc_stripes_sizes.c

Multi-stripes method functions for ipu_device.c

vdoa.c

VDOA post-processing driver, used by ipu_device.c

drivers/video/fbdev/mxc:

File Description

mxc_ipuv3_fb.c

Driver for synchronous frame buffer

mxc_hdmi.c

Display driver for HDMI interface

ldb.c

Driver for synchronous frame buffer for on chip LVDS

mxc_dispdrv.c

Display driver framework for synchronous frame buffer

mxc_edid.c

Driver for EDID

Device tree bindings and customization

The {cpu-family} IPU device tree binding is documented at Documentation/devicetree/bindings/fb/fsl_ipuv3_fb.txt.

The IPU is defined in the {cpu-family} CPU and ConnectCore 6 SBC device tree files.

Definition of the IPU interface

Common ConnectCore 6 device tree
ipu1: ipu@02400000 {

	#address-cells = <1>;
	#size-cells = <0>;

	compatible = "fsl,imx6q-ipu";
	reg = <0x02400000 0x400000>;
	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>,
	             <0 5 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&clks IMX6QDL_CLK_IPU1>,
	         <&clks IMX6QDL_CLK_IPU1_DI0>, <&clks IMX6QDL_CLK_IPU1_DI1>,
	         <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
	         <&clks IMX6QDL_CLK_LDB_DI0>, <&clks IMX6QDL_CLK_LDB_DI1>;
	clock-names = "bus",
	              "di0", "di1",
	              "di0_sel", "di1_sel",
	              "ldb_di0", "ldb_di1";
	resets = <&src 2>;
	bypass_reset = <0>;
};