To start working with the ConnectCore 8X module and Digi Embedded Yocto, you need the following items:
-
A ConnectCore 8X Kit
Verify that your ConnectCore 8X Development Kit contains the following components:
| Qty. | Part | Image |
|---|---|---|
1 |
ConnectCore 8X SBC Pro |
|
1 |
5V/3A power supply with EU, UK, AUST adapters |
|
1 |
USB to TTL 3.3V cable |
|
2 |
4" U.FL female to RPSMA female cable adapter |
|
2 |
Whip antenna, Wi-Fi 2.4/5GHz |
|
1 |
Set of standoffs and nuts for the ConnectCore 8X SBC Pro board |
|
1 |
Mounting hardware for a PCIe card |
|
-
A 64-bit Linux machine for application development and system customization, with at least:
-
4 GB of RAM
-
4 CPU cores
-
100 GB of free disk space
For successful Digi Embedded Yocto projects, we recommend you use a Yocto Project-supported Ubuntu distribution. You can find Yocto Project-supported distributions in the Yocto Project system requirements at https://www.yoctoproject.org/docs/3.0/ref-manual/ref-manual.html#intro-requirements.
-
-
Additional components not included in the kit:
-
FAT-formatted microSD card
-
Ethernet cable (optional)
-
