Configure a client ID

You can assign a descriptive name to a client ID in the client list, and update the groups the client ID is allowed to access. The client ID can access all of the ports in the specified groups, as defined in the Group Settings section.

Note If needed, you can also add additional client IDs to the list.

1. Open the web UI.

2. Select System > Configuration > AnywhereUSB Configuration. The AnywhereUSB Configuration page appears.
3. Expand the Client Settings section.
4. From the client list, select the client ID that you want to configure. Information about the selected client ID displays in the Settings for Client section.
5. Click Edit.
6. In the Description field, enter a descriptive name for the client ID.
7. Click the check box next to a group to which the computer is allowed access. As you select groups, the selected group numbers appear in the Group Access field in the Settings for Client section. You can also manually enter group numbers in the Group Access field.

Note The Certificate value is Unavailable until certificates have been exchanged between the computer and the Hub. After this occurs, the Certificate value is updated to Available.

8. Click Apply to save the changes.