Assign groups to a client ID

You can assign the groups to a client ID that was specified when you installed the AnywhereUSB Manager. When the client ID connects to the AnywhereUSB Manager, the computer can access all of the ports in the specified groups.

Note Make sure that you have at least one client ID created for the AnywhereUSB Manager and Hub combination. You can manually add client IDs, if needed. See Add client IDs to the client list.

1. Open the web UI.

2. Select System > Configuration > AnywhereUSB Configuration. The AnywhereUSB Configuration page appears.
3. Expand the Client Settings section.
4. In the Select a client to configure list, select the client ID to which you want to assign groups. Information about the selected client ID displays in the Settings for Client section.
5. A list of the group numbers displays beneath the Group Access field. Click the check box next to a group to which this client ID is allowed access. As you select groups, the selected group numbers appear in the Group Access field.

You can also manually enter group numbers in the Group Access field.

6. Click Apply to save the changes.