Step 9: Create and connect to groups

After you have completed your initial connection, you can create groups and assign ports to each group. Once this step is complete, you can specify the groups that a client ID is allowed to access.

• Create groups and assign to client IDs

• Connect to groups

  You can open the AnywhereUSB Manager and connect to the Hubs and groups to which access is allowed. The type of user (Administrator or non-Administrator) that can open the Manager depends on the installation method you selected.

  • Stand-alone: Any user (an Administrator or a non-Administrator) can run the AnywhereUSB Manager.

  • Service: Only an Administrator can run the AnywhereUSB Manager.

 

NEXT STEP: If you are performing the initial device set-up, proceed to the next step after initial connection: Step 10: Configure the Hub.