Connect to a group of USB ports

To be able to use the USB ports on the AnywhereUSB Plus, you must launch the AnywhereUSB Manager and connect to the group to which the USB port is assigned.

Once you have connected to a group, no one else can connect to that group. You cannot connect to a group that is already is use.

Note You can connect to only the groups that have been assigned to your client ID and that are not currently connected to a different client ID.

When you have connected to a group, a note appears next to the group name, next to the devices in the group, and in the Group Status pane to show that the device is being used by you.

1. Open the Anywhere USB Manager.
2. Expand AnywhereUSB Plus Hubs to display the Hubs.
3. Expand a Hub to display the groups in the Hub.
4. Right-click on the group to which you want to connect.
5. Select Connect to Group. A note appears next to the group name, next to the devices in the group, and in the Group Status pane to show that the device is being used by you.