Configure the block client ID time limit

You can configure the default time limit for the client ID block. The default is 10 minutes.

When you apply a block, the client ID is automatically disconnected from the devices in the group(s) for the default time period. The client ID can't manually reconnect to the devices in the blocked group, and auto-connect is suspended.

When the blocked time period limit is reached, any group that has auto-connect enabled automatically reconnects. The client ID can also manually reconnect to devices in the previously blocked groups.

Note You can also use a CLI command to configure the time limit.

  1. Open the web UI.

  2. Select System > Configuration > Device Configuration > Services > AnywhereUSB.

  3. In the Client block duration field, enter the default time period.
    • Default: 10 minutes
    • Maximum: 100 hours
    • Minimum: 30 seconds
  4. Click Apply to save the changes.