Review AnywhereUSB Plus default settings

You can review the default settings for your AnywhereUSB Plus device by using the local WebUI or Digi Remote Manager:

Local WebUI

  1. Log into the AnywhereUSB Plus WebUI as a user with Admin access. See Open the web user interface for details.
  2. On the menu, click System > Device Configuration.

Digi Remote Manager

  1. If you have not already done so, connect to your Digi Remote Manager account.
  2. From the menu, click Devices to display a list of your devices.
  3. Locate your device as described in Use Digi Remote Manager to view and manage your device.
  4. Click the Device ID.
  5. Click Settings.

The following tables list important factory default settings for the AnywhereUSB Plus.

Default interface configuration

Interface type Preconfigured interfaces Devices Default configuration

Wide Area Networks (WANs)

(Available only on the AnywhereUSB Plus 8 and 24 models.)
  • Modem
  • WWAN1 cellular modem
  • Firewall zone: External
  • WAN priority: Metric=3
  • SIM failover after 5 attempts
Ethernet Network
  • ETH1
  • Ethernet: ETH1
  • Firewall zone: Edge
  • DHCP client enabled
 
  • Loopback
  • Ethernet: Loopback
  • Firewall zone: Loopback
  • IP address: 127.0.0.1/8
 
  • Setup IP
  • Ethernet: ETH1
  • Firewall zone: Setup
  • IP address 192.168.210.1/24
 
  • Setup Link-local IP
  • Ethernet: ETH1
  • Firewall zone: Setup
  • IP address 169.254.100.100/16
 
  • ETH2

(Available on the AnywhereUSB Plus 24 model only.)
  • Ethernet: ETH2
  • Firewall zone: Edge
  • DHCP client enabled

Other default configuration settings

Feature Configuration
Central management
  • Digi Remote Manager enabled as the central management service.
Security policies
  • Packet filtering allows all outbound traffic.
  • SSH and web administration:
    • Enabled for local administration
    • Firewall zone: Set up
Monitoring
  • Device heath metrics uploaded to Digi Remote Manager at 60 minute interval.
  • SNMP: Disabled