Set the server time manually

You can use this method to manually set the time for the Hub. This overrides the NTP time synchronization. See Configure the time on the Hub.

If you use this method, and the Hub has lost power (both external and internal), or if you reboot the Hub, the Set Time option is de-selected and the time reverts to the last time stamp that was written to the Hub log file. If you want to more accurately set the time, you should either configure time server synchronization or manually re-set the time using the process below.

Note Digi recommends using NTP. See Configure time server synchronization.

To manually set the time:

  1. Open the web UI.
  2. Click Time in the Configuration section. The Time Configuration page appears.
  3. If the Enable Time Server Synchronization option is selected, de-select it.
  4. Select Set Time in the Time Settings section. This enables you to manually set the time.
  5. Specify the current date and time for the server in the Month, Day, Year, Hour, Minute, and Second fields.
  6. From the Timezone drop-down, select the time zone the server is in.
  7. Click Apply to apply and save the change.