Configure network services

You can configure network services in the Network Service Configuration page in the WVA web interface. Settings on this page enable or disable common network services on the WVA, and configure the network port on which the service is listening. You can disable network services to improve device security, so the device runs only specifically needed network services.

  1. Open the WVA web interface.
  2. In the web interface, go to Configuration > Network Services to display the Network Services page.

    3. Network Services settings

  3. Enable/disable the network services as needed. See Network Service Configuration page descriptions for more information about each service and its default TCP port number. It is usually best to use the default TCP port numbers for these services because they are well-known by most applications.
  1. Click Apply.