Network LED

The signal strength LED is identified by this icon:

Network system LED when power is off

Note The Network LED remains dark during the initial boot of the device. All diagnosis related to this LED must be done after the device has been running for at least 60 seconds.

Color and blink pattern Description
OFF XBee Industrial Gateway operating system is not yet running.
Blinking yellow, slow Operating system is running, but no network link is established or IP address assigned.
Solid yellow An IP address has been assigned to XBee Industrial Gateway.

Blinking yellow - fast

(1 blink per second)

A network issue has occurred. The two most common Remote Manager connectivity-related reasons for this state are:

  1. XBee Industrial Gateway cannot connect to a DNS server to resolve the Remote Manager server address. See Cannot connect to DNS server to resolve the Remote Manager server address.
  2. XBee Industrial Gateway cannot connect to an NTP time server to get the correct time. See Cannot connect to NTP time server to get correct time.
Solid yellow to blinking green XBee Industrial Gateway is attempting a connection to a Remote Manager server.

Blinking green - fast

(1 blink per second)

 Remote Manager server found and XBee Industrial Gateway is undergoing authentication.
Solid green XBee Industrial Gateway is connected to the Remote Manager server.