Services used to discover a device when connected to a network

To discover the IP address for a Digi device connected to your network, the Digi Navigator uses the HTTPS service by default. Other services can be used, if needed.

1. Make sure Digi Navigator is installed and the Connect EZ is powered and connected to your local network or computer with an Ethernet cable.

2. Launch the Digi Navigator.

3. Click Filters from the green toolbar to expand the toolbar and display the filter options.

   

4. In the Services Filters section, click the enable button to enable the services that you want to use to find an IP address.

5. Click Filters at the bottom of the expanded toolbar to minimize the toolbar and hide the filters.