Specify the IP address to discover a Digi device

If a Digi device is not on the same network as your computer or the device is undiscoverable, you can manually add the device using that device's IP address.

To add a device, you will need the devices's IP address, and the user name and password for the device.

1. Make sure Digi Navigator is installed and the Connect EZ is powered and connected to your local network or computer with an Ethernet cable.

2. Launch the Digi Navigator.

3. Expand the Specify a device section.

4. In the IP Address field, enter the IP address or host name for the device.

5. Press Enter. A dialog displays.

6. Enter the user name and password for the device in the User name and Password fields.

7. Click Submit.

8. The device you just added displays at the bottom of the Digi Navigator screen. You can click Refresh to update the screen until the device appears.