N# (Preferred Network Technology)

Allows the XBee 3 Cellular LTE-M/NB-IoT module to select the preferred network technology. A reboot or power cycle is required for any parameter changes to become active.

Note For the N# command configuration to take effect, the CP command must be set to 1 (No Profile). Setting the CP command to 1 configures the enabled 4G LTE bands for NB-IoT. If CP is not set to 1, the N# command value is ignored.

Range

0 - 3

Parameter Description
0

LTE-M with NB-IoT fallback.

1

NB-IoT with LTE-M fallback.

2 LTE-M only.
3 NB-IoT only.

Default

0