DX (Requested eDRX cycle length)

This command applies to the XBee 3 Cellular LTE-M/NB-IoT.

The eDRX cycle length (in milliseconds) that will be requested from the network if DO command bit 5 is set. For best power characteristics, you should set this to the maximum receive latency your application is designed to tolerate.

The actual value obtained is provided by the network and is generally less than the value requested. The specific legal values depend on network access technology and carrier policy. The maximum value, where data is retained by the network without loss, also depends on carrier policy and this value should be selected in light of guidance provided by your carrier.

Parameter range

N/A

Default

0xea60 (60 seconds)