BM (Bandmask) (LTE-M)

Note This command is for use with only LTE-M.

Configures the enabled 4G LTE bands for LTE-M when CP is set to 1 (No Profile).

Changes to the value only take effect on boot so a reboot or power cycle is required for any changes to become active.

Note The actual set of enabled bands will be a subset of this bit field, depending on the limitations of the cellular component.

WARNING! If this value is configured incorrectly, the XBee module may be unable to locate a tower and join the network.

Parameter range

0 - 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF (bit field)

Bit LTE Band
0 1
...  
127 128

Example

0x080080 (bits 7 and 19) enable LTE Bands 8 and 20.

Default

0xFFFFFFFFFFFFFFFF (bands 1-64 enabled)