Network LED

Note The Network LED remains dark during the initial boot of the device. All diagnosis related to this LED must be done after the device has been running for at least 60 seconds.

See Troubleshooting LEDs for troubleshooting information.

LED Color and blink pattern Description
Network system LED when power is off OFF XBee Gateway operating system is not yet running.
Yelllow network system LED Blinking yellow, slow Operating system is running, but no network link is established or IP address assigned.
Solid yellow An IP address has been assigned to XBee Gateway.
Blinking yellow - fast (1 blink per second)

A network issue has occurred. The two most common Remote Manager connectivity-related reasons for this state are:

  1. XBee Gateway cannot connect to a DNS server to resolve the Remote Manager server address. See Cannot connect to DNS server to resolve the Remote Manager server address for troubleshooting information.
  1. XBee Gateway cannot connect to an NTP time server to get the correct time. See Cannot connect to NTP time server to get correct time for troubleshooting information.
Yelllow network system LED Blinking green network system LED Solid yellow to blinking green XBee Gateway is attempting a connection to a Remote Manager server.
Blinking green network system LED Blinking green - fast (1 blink per second) Remote Manager server found and XBee Gateway is undergoing authentication.
Solid green XBee Gateway is connected to the Remote Manager server.