Home / Support / Knowledge Base / Digi IX14 Cellular Module type from PN
You are viewing an article about an obsolete product. Information on this page is provided as-is and not supported.

How to Identify the Cellular Module in a Digi IX14 Router from its Part Number

Digi® IX14 routers can have different variants of Telit LE910 model inside, depending on the region where they can be used and bands/speed/technology supported.

In order to determine which specific cellular module type is inside an IX14, the PN can be used following the table below:
 

IX14-L301 LTE – EMEA (L3) Telit LE910C1_EU LTE Cat 1: 700(B28)/800(B20)/900(B8)/1800(B3)/2100(B1)/2600(B7)
3G: 900(B8)/1800(B3)/2100(B1)
2G EDGE: 900(B8)/1800(B3)
Transfer rate (max): 10 Mbps down, 5 Mbps up
IX14-M301 LTE – EMEA (M3) Telit LE910 EU-1 LTE Cat 1: 800(B20)/900(B8)/1800(B3)/2100(B1)/2600 (B7)
2G EDGE: 900/1800 MHz
Transfer rate (max): 10 Mbps down, 5 Mbps up
IX14-M401 LTE – UNITED STATES (M4) Telit LE910C1-NS LTE Cat 1: 700(B12)/850(B5,B26)/AWS(B4)/1900(B2,B25)
Transfer rate (max): 10 Mbps down, 5 Mbps up
Approvals: Sprint
IX14-M601 LTE – NORTH AMERICA (M6) Telit LE910 NA-1 LTE Cat 1: 700(B12,B13)/850(B5)/AWS(B4)/1900(B2)
HSPA+: 850/1900 MHz
Transfer rate (max): 10 Mbps down, 5 Mbps up
Approvals: PTCRB, AT&T, Verizon
IX14-M901 LTE – ANZ/LATAM (M9) Telit LE910C1-AP LTE Cat 1: 700(B28)/850(B5)/900(B8)/1800(B3)/2100(B1)
3G HSPA+: 850/900/2100 MHz
Transfer rate (max): 10 Mbps down, 5 Mbps up


Other specifications for the different PNs can be found in the Digi IX14 Product Page: https://www.digi.com/products/networking/cellular-routers/industrial/digi-ix14#specifications


 

Last updated: Jun 24, 2024

Filed Under

Cellular/Transport

Recently Viewed

No recently viewed articles

Did you find this article helpful?