Add a device to Remote Manager using your Remote Manager login credentials

If you want to add a device to Remote Manager, and you do not have its password, you can add it using your Remote Manager login credentials.

To add a device using your Remote Manager credentials:

 

  1. Log into the IX15 WebUI as a user with full Admin access rights.

  2. On the dashboard, in Digi Remote Manager status pane, click Register device in new account.

  3. The Register Device in New Account page displays.

  4. For Digi Remote Manager Username, type your Remote Manager username.

  5. For Digi Remote Manager Password, type your Remote Manager password.

  6. For Digi Remote Manager Group (optional), type the group to which the device will be added, if needed.

  7. Click Register.

    The device is added to Remote Manager.

 

  1. Log into the IX15 local command line as a user with full Admin access rights.

  2. Register a device.

    (register) [group STRING] password STRING username STRING

    where:

    • group: group to add device in Digi Remote Manager.

    • password: Digi Remote Manager password (required).

    • username: Digi Remote Manager username (required).

  3. Click Apply to save the configuration and apply the change.
  4. Save the configuration and apply the change.
    (config)> save
Configuration saved.
>
  5. Type exit to exit the Admin CLI.

    Depending on your device configuration, you may be presented with an Access selection menu. Type quit to disconnect from the device.