Set up the LR54 for Python development

  1. Access the LR54 local web interface

    1. Use an Ethernet cable to connect the LR54 to your local laptop or PC. 
      The factory default IP address is 192.168.2.1

    2. Log into the LR54 WebUI as a user with full admin access rights.
      The default user name is admin and the default password is the unique password printed on the label packaged with your device.
  2. Go to the Configuration window

    1. On the menu, click System.
    2. Under Configuration, click Device Configuration. The Configuration window displays.
  3. Enable service discovery (mDNS)

    1. Click Services > Service Discovery (mDNS).
    2. Enable the mDNS service.

Note For more information, see Enable service discovery (mDNS).

  1. Configure SSH access
    1. Click Services > SSH.
    2. Click Enable.

Note For more information, see the following topics: Configure SSH access, Use SSH with key authentication, and Allow remote access for web administration and SSH.

  1. Enable shell access

    1. Click Authentication > Groups > admin.

    2. Click the Interactive shell access option.

    3. If this option is not displayed, see Disable shell access.

  2. Click Apply to save the configuration and apply the changes.
    The Apply button is located at the top of the WebUI page. You may need to scroll to the top of the page to locate it.