Manually set the system date and time

If your network restricts access to NTP servers, use this procedure to set the local date and time.

This procedure is available at the Admin CLI only.

 Command line

Select the device in Remote Manager and click Actions > Open Console, or log into the AnywhereUSB Plus local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection menu. Type admin to access the Admin CLI.
Set the device's local date and time:
```
> system time set value
> 
```
where value is the date in year-month-day hour:minute:second format. The value must be surrounded by double quotes. For example:
```
> system time set "2024-01-12 12:10:00"
>
```
Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection menu. Type quit to disconnect from the device.