Configure routing services

Required configuration items

Enable routing services.
Enable and configure the types of routing services that will be used.

 Web

Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access rights.
Access the device configuration:
Remote Manager:
1. Locate your device as described in Use Digi Remote Manager to view and manage your device.
2. Click the Device ID.
3. Click Settings.
4. Click to expand Config.
Local Web UI:
1. On the menu, click System. Under Configuration, click Device Configuration.
  The Configuration window is displayed.
Click Network > Routes > Routing services.
Click Enable.

The default firewall zone setting, Dynamic routes, is specifically designed to work with routing services and should be left as the default.
Configure the routing services that will be used:
1. Click to expand a routing service.
2. Enable the routing service.
3. Complete the configuration of the routing service.
Click Apply to save the configuration and apply the change.

 Command line

Select the device in Remote Manager and click Actions > Open Console, or log into the AnywhereUSB Plus local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection menu. Type admin to access the Admin CLI.
At the command line, type config to enter configuration mode:
```
> config
(config)>
```

Enable routing services:

(config)> network route service enable true
(config)>

Configure routing services that will be used:

Use the ? to display available routing services:

(config)> network route service ?

Routing services: Settings for dynamic routing services and protocols.

 Parameters                Current Value
 -------------------------------------------------------------------------------
 enable                    true            Enable
 zone                      dynamic_routes  Zone

 Additional Configuration
 -------------------------------------------------------------------------------
 bgp                       BGP
 isis                      IS-IS
 nhrp                      NHRP
 ospfv2                    OSPFv2
 ospfv3                    OSPFv3
 rip                       RIP
 ripng                     RIPng

(config)>

Enable a routing service that will be used. For example, to enable the RIP service:
```
(config)> network route service rip enable true
(config)>
```

Complete the configuration of the routing service. For example, use the ? to view the available parameters for the RIP service:

(config)> network route service rip ?

 Parameters                Current Value
 -------------------------------------------------------------------------------
 ecmp                      false          Allow ECMP
 enable                    true           Enable

 Additional Configuration
 -------------------------------------------------------------------------------
 interface                 Interfaces
 neighbour                 Neighbours
 redis                     Route redistribution
 timer                     Timers

(config)>

Save the configuration and apply the change.
```
(config)> save
Configuration saved.
>
```
Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection menu. Type quit to disconnect from the device.