See Configure options for the event and system logs for information about configuring the information displayed in event and system logs.
View System Logs
Web
- On the main menu, click System > Logs.
The system log displays:
- Limit the display in the system log by using the Find search tool.
- Use filters to configure the types of information displayed in the system logs.
- Click to download the system log.
Log into the AnywhereUSB Plus WebUI as a user with full Admin access rights.
Command line
- Select the device in Remote Manager and click Actions > Open Console, or log into the AnywhereUSB Plus local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection menu. Type admin to access the Admin CLI.
- Use the show log command at the Admin CLI prompt:
> show log Timestamp Message -------------- ------------------------------------------------------------- Nov 26 21:54:34 AnywhereUSB Plus netifd: Interface 'interface_wan' is setting up now Nov 26 21:54:35 AnywhereUSB Plus firewalld[621]: reloading status ... >
- (Optional) Use the show log number num command to limit the number of lines that are displayed. For example, to limit the log to the most recent ten lines:
> show log number 10 Timestamp Message -------------- ------------------------------------------------------------- Nov 26 21:54:34 AnywhereUSB Plus netifd: Interface 'interface_wan' is setting up now Nov 26 21:54:35 AnywhereUSB Plus firewalld[621]: reloading status ... >
- (Optional) Use the show log filter value command to limit the number of lines that are displayed. Allowed values are critical, warning, info, and debug. For example, to limit the event list to only info messages:
> show log filter info Timestamp Type Category Message ---------------- ------- --------- ------------------------------------------- Nov 26 22:01:26 info user name=admin~service=cli~state=opened~remote=192.168.1.2 Nov 26 22:01:25 info user name=admin~service=cli~state=closed~remote=192.168.1.2 ... >
- Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection menu. Type quit to disconnect from the device.
View Event Logs
Web
- On the main menu, click System > Logs.
- Click System Logs to collapse the system logs viewer, or scroll down to Events.
- Click Events to expand the event viewer.
- Limit the display in the event log by using the Find search tool.
- Click to download the event log.
Log into the AnywhereUSB Plus WebUI as a user with full Admin access rights.
Command line
- Select the device in Remote Manager and click Actions > Open Console, or log into the AnywhereUSB Plus local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection menu. Type admin to access the Admin CLI.
- Use the show event command at the Admin CLI prompt:
> show event Timestamp Type Category Message ---------------- ------- --------- ------------------------------------------- Nov 26 21:42:37 status stat intf=eth1~type=ethernet~rx=11332435~tx=5038762 Nov 26 21:42:35 status system local_time=Thu, 08 Aug 2019 21:42:35 +0000~uptime=3 hours, 0 minutes, 48 seconds ... >
- (Optional) Use the show event number num command to limit the number of lines that are displayed. For example, to limit the event list to the most recent ten lines:
> show event number 10 Timestamp Type Category Message ---------------- ------- --------- ------------------------------------------- Nov 26 21:42:37 status stat intf=eth1~type=ethernet~rx=11332435~tx=5038762 Nov 26 21:42:35 status system local_time=Thu, 08 Aug 2019 21:42:35 +0000~uptime=3 hours, 0 minutes, 48 seconds ... >
- (Optional) Use the show event table value command to limit the number of lines that are displayed. Allowed values are error, info, and status. For example, to limit the event list to only info messages:
> show event table info Timestamp Type Category Message ---------------- ------- --------- ------------------------------------------- Nov 26 22:01:26 info user name=admin~service=cli~state=opened~remote=192.168.1.2 Nov 26 22:01:25 info user name=admin~service=cli~state=closed~remote=192.168.1.2 ... >
- Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection menu. Type quit to disconnect from the device.
PDF
